Seagate ST3160021A Manual De Usuario

ST3200822A

200.0

390,721,968

8 Mbytes

ST3200821A

200.0

390,721,968

2 Mbytes

ST3160023A

160.0

312,581,808

8 Mbytes

ST3160021A

160.0

312,581,808

2 Mbytes

ST3120026A

120.0

234,441,648

8 Mbytes

ST3120022A

120.0

234,441,648

2 Mbytes

ST380013A

80.0

156,301,488

8 Mbytes

ST380011A

80.0

156,301,488

2 Mbytes

ST340014A

40.0

78,165,360

2 Mbytes

*One sector equals 512 bytes.

Installing a single drive
If you are installing a single drive, we recommend using DiscWizard to auto-
matically partition and format your drive. DiscWizard software is available at
www.seagate.com and is free. During the download, the Diskette Creator cre-
ates a portable bootable diskette. To run DiscWizard:

1.

Insert your bootable DiscWizard diskette and follow the instructions. Dis-
cWizard will guide you through the installation process.

2.

Boot your computer from the Windows operating system CD-ROM or from
your system startup diskette with the Windows CD loaded. At the prompt,
type setup. Follow the instructions provided on your screen.

Installing a slave drive
If you are installing a second drive, or slave, to your system, use the DiscWiz-
ard software available at www.seagate.com.
If you do not want to install your drive using either DiscWizard or Disk Man-
ager, see “Standard Microsoft Installation” below to partition and format your
drive.

Caution. Partitioning or formatting a drive erases all data on the drive.

Seagate assumes no liability if you erase your data.

1.

Insert a bootable Windows startup diskette and restart your computer. This
is provided with your Microsoft Windows operating system software.

2.

Run fdisk and create a primary DOS partition.

3.

Mark the partition as active to make the partition bootable.

Caution. Use the correct drive letters to prevent formatting a drive that already

contains data.

1.

At the A: prompt, type format x: (where x is the letter of your first new par-
tition) and then press the Enter key. Repeat the format process for all new
partitions.

2.

Proceed to “Loading the operating system” below.

Note. The operating system needs to be installed on the master drive only. It

is not required when adding a second drive.

1.

Boot your computer from your Windows operating system CD-ROM or
from your system startup diskette with the Windows CD loaded in the CD
drive.

2.

At the prompt, type setup and continue with the Windows setup as
instructed on your screen.

If your drive is not working properly, these troubleshooting tips may help solve
the problem.

1.

Does the drive spin up? A spinning drive produces a faint whine and
clicking noise that begins when power is applied. If your drive does not
spin, check that the power connector and interface cable are securely
attached and the jumpers are installed correctly.

2.

Does the computer recognize the drive? Verify that the drive is enabled
in the system CMOS or setup program. If not, select the autodetect option
and enable it. If your drive has a problem, it may not be recognized by the
system.

3.

Does FDISK detect the drive? Run the FDISK program located on your
Windows startup diskette. Type fdisk/status to verify that your hard drive
is present and recognized by the system.

4.

Does Scandisk find the drive defect-free? Scandisk is a utility located
on your Windows startup diskette that scans the drive for defects. If defects
are detected, this may be an indication of a problem.

5.

Why won’t the drive format to full capacity? Verify that your BIOS has
autodetect and LBA mode enabled. Otherwise, you may need to use Disk

Manager to achieve the full capacity of your drive. Download the latest ver-
sion from www.seagate.com or find it on your CD.

6.

Why does my computer hang on startup? Verify that your system is
ATA/100 compatible with the UDMA mode setting. Some legacy BIOS
cause hangs on startup or other problems if it is not ATA/100 compatible.
For more information, see the earlier section on the Ultra ATA/100 require-
ments. In addition, some legacy BIOS may cause a hang due to the large
drive capacity. Consider using the alternate capacity jumper if it is available
on your drive model. 
Use the alternate capacity jumper if your computer does not support higher
capacity drives. The jumper will limit large capacity drives to 32 Gbytes.

Note. If these tips do not answer your question or solve the problem, contact

your dealer or visit http://seatools.seagate.com to download SeaTools
disc diagnostics software and more troubleshooting advice.

For online information about Seagate products, visit www.seagate.com or
e-mail your disc questions to DiscSupport@Seagate.com.

If you need help installing your drive, consult your dealer first. If you need addi-
tional help, call a Seagate technical support specialist. Before calling, note
your system configuration and drive model number.

Africa

+1-405-324-4714

Netherlands

00 800-47324283

Australia

1800-14-7201

New Zealand

0800-443988

Belgium

00 800-47324283

Norway

00 800-47324283

China*

800-810-9668

Poland

00 800-311 12 38

Denmark

00 800-47324283

Spain

00 800-47324283

France

00 800-47324283

Sweden

00 800-47324283

Germany

00 800-47324283

Switzerland

00 800-47324283

Hong Kong

800-90-0474

Singapore

800-1101-150

Hong Kong† 001-800-0830-1730

Taiwan*

00-800-0830-1730

India

1-600-180-1104

Thailand

001-800-11-0032165

Indonesia

001-803-1-003-2165

Turkey

00 800-31 92 91 40

Ireland

00 800-47324283

United Kingdom 00 800-47324283

Italy

00 800-47324283

USA/Canada/

1-800 SEAGATE or

Japan

0034 800 400 554

Latin America

+1-405-324-4700

Korea

007 98 8521 7635

Other European

Malaysia

1-800-80-2335

countries

+1-405-324-4714

Middle East

+1-405-324-4714

*Mandarin
†Cantonese

Warranty. To determine the warranty status of your Seagate disc drive, contact your place
of purchase or visit our web site at www.seagate.com for more information. 
Return Merchandise Authorization (RMA).

Run SeaTools to diagnose your drive

before requesting a return authorization. In addition, please verify that your drive is defec-
tive by following the troubleshooting checklist in this guide. Seagate offers comprehensive
customer support for all Seagate drives worldwide. Seagate customer service centers are
the only facilities authorized to service Seagate drives. Drive return procedures vary
depending on geographical location and are subject to current international trade regula-
tions.

Shipping the drive
Caution. Back up the data before shipping. Seagate assumes no responsibility for data

lost during shipping or service.

Shipping drive in an unapproved container voids the warranty. Pack the drive with original
box and packing materials. Use no other materials. This prevents electrical and physical
damage in transit.

Electromagnetic compliance for the European Union. This model complies with the
European Union requirements of the Electromagnetic Compatibility Directive 89/336/EEC
of 03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and Directive 93/68/
EEC of 22 July 1993. Compliance of this drive, as a system component, was confirmed
with a test system. We cannot guarantee that your system will comply. The drive is not
meant for external use (without properly designed enclosure, shielded I/O cable, etc.).

Sicherheitsanleitung  1. Das Gerrät ist ein Einbaugerät, das für eine maximale Umge-
bungstempeatur von 60°C vorgesehen ist. 2. Zur Befestigung des Lufwerks werden 4
Schrauben 6-32 UNC-2A benötigt. Bei seitlicher Befestigung darf die maximale Länge der
Schrauben im Chassis nicht merh als 3,3 mm und bei Befestigung an der Unterseite nicht
mehr als 5,08 mm betragen. 3. Als Versorgungsspannugen werden benötigt: +5V +/- 5%
1,2A; +12V +/- 5% 2,0A 4. Die Versorgungsspannung muss SELV entsprechen. 5.  Alle
Arbeiten auf dem Festplattte dürfen nur von Ausgebiletem Serciepersonal durchgeführt
werden. Bitte entfernen Sie nicht die Aufschriftenschilder des Laufwerkes. 6. Der Einbau
des Laufwerkes muss den Anforderungen gemäss DIN IEC 950 VDE 0805/05.90
entspreche.