JVC RS-WP1WT Manual De Usuario

Note:
The lighting condition for the “STANDBY” indicator and the display
differs depending on the power source being used, as follows:

•

When the System is operated on batteries, press the 
STANDBY/ON button on the Unit. It cannot be turned on with
the Remote Control.

The “STANDBY” indicator goes out when the System is operated
on AC power or car battery (DC12V).
The display comes on and the System is ready to continue in the
mode it was in when the power was last turned off.

■

For example, if the last thing you were doing was listening to a
CD, you are now ready to listen to a CD again. If you wish, you
can change to another source.

■

If you were listening to the Tuner last, the Tuner comes on
playing the station it was last set to.

The “STANDBY” indicator lights up when the System is operated
on AC power or car battery (DC12V).
The contents of the display changes to the clock, and “CLOCK”
indicator and the time are displayed without backlighting.

SLEEP

CLOCK

TIMER

TIMER

ON/OFF

PROGRAM

RANDOM

REPEAT

BAND

DISPLAY

REVERSE MODE

MULTI  CONTROL

FM MODE

REW

FF

RM-SRSWP1U    REMOTE  CONTROL

DOWN

UP

SET

BASS/

TREBLE

AUTO

PRESET

DISPLAY

AHB PRO

STANDBY/ON

BASS/TREBLE
VOLUME + / –

VOLUME + / –

A.P.OFF

STANDBY/ON

STANDBY
indicator

or

or

AC power or car
battery (DC12V)

Batteries

• The “STANDBY” indicator lights when the power is turned

off.

• Backlighting of the display is illuminated when power is

turned on.

• The “STANDBY” indicator does not light.
• Backlighting of the display is not illuminated. However, the

backlighting is illuminated for a few seconds after operation.

PHONES

■

Some power is always consumed even though power is turned
off (called Standby Mode).

■

To switch off the System completely, unplug the AC adaptor
from the AC outlet. If no battery is loaded in the System and it
left with the AC adaptor unplugged (or when there is a power
failure) for more than 5 minutes, the clock will be reset to
“AM 12:00”.

This System incorporates the AUTO POWER OFF function which
automatically turns the System off when no sound has been
produced for more than 10 minutes. In consequence, when 10
minutes have elapsed without any operation after completion of CD
or Tape operation, the power of the System is turned off
automatically.
When the playback or recording operation is performed within 10
minutes, the count by the AUTO POWER OFF function is disabled,
but it starts again as soon as the playback or recording completes.
When operations other than playback or recording is performed, the
count by the AUTO POWER OFF function starts after the last
operation of this kind, and the system is turned off in 10 minutes if
no more operation is performed.
At 1 minute before the system is turned off by the AUTO POWER
OFF function, message “P.OFF” blinks in the display.
The AUTO POWER OFF function is not available in Tuner mode or
AUX mode.

To enable the AUTO POWER OFF function
Press the A.P.OFF button on the Unit for more than two seconds so
that “A.P.OFF” appears in the display.

To disable the AUTO POWER OFF function
Press the A.P.OFF  button on the Unit for more than two seconds so
that “A.P.OFF” disappears from the display.