Philips CRT TV Manual De Usuario

Connect Accessory Devices

Peripherals connected to AV3

There are three possible ways to connect your Accessory Devices to the

AV3

input.

•

In case of a peripheral with CVBS output, connect the video cable to the
video input of the TV.

•

In case of a peripheral with S-VHS output, connect the video cable to the

S-VIDEO

input of the TV.

•

In case of a peripheral with component video cables, connect them to the

and

inputs

AND

also connect a video cable to the video input

(in order to have correct picture reproduction).

Always connect the audio cables to the peripheral’s

AUDIO L

and

jacks

and to the

L AUDIO

and

R AUDIO AV3

jacks on the TV.

When you have a Digital Antenna cable connected to a digital Set top Box,
connect the Set top Box to the

AV4 IN VIDEO 2 Fh

input.

Connect a Set top Box with 2 Fh RGB output to the H, V, R, G and

jacks

and to the

and

R AUDIO

jacks.

Connect a Set top Box with 2Fh Pr, Pb,Y output to the Pr, Pb and Y jacks
and to the

and

R AUDIO

jacks.

See also the manual of your High Definition Set top Box.

Note: This television is designed to accept high definition signal standards 480p and -

1080i as specified by the Electronic Industries Association standard EIA770.3.
Set-top boxes from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.

Warning: in case you notice scrolling images, wrong colors or no color, no picture, or

even combinations of these on your screen, check if the connections are done in
the right way:

- for Y, Pb, Pr 2Fh: check if the cable colors match with the input connector colors
- for RGB-HV 2Fh: check additionally if the H and V cables are connected to the

respective H and V input connectors, and if necessary exchange
both connections.

AV4 Digital High Definition input

AV 3

VIDEO

L AUDIO

R AUDIO

S VIDEO

AV 4

VIDEO 1080i - 2Fh

/ R

/ B

/ G

AUDIO