Roberts Radio DreamTime2 Manual De Usuario

1. Press 

the 

On / Standby button to switch on your clock radio. 

 When 

fi rst switched on, the radio will be in DAB mode. After each use 

the radio will remember the mode used and then switch on in that 
mode the next time that it is used.

2.  If the clock radio has been used before, the last used station will be 

selected.

 
3.  If this is the fi rst time that the clock radio has been used a quick scan 

of the Band III DAB channels will be carried out. During the scanning 
process the display will show the progress of the station search. The 
number on the right of the display is the number of stations that have 
been found.

4.  When the scan is completed the fi rst station (in numeric-alpha order 

0...9, A...Z will be selected. The fi rst station in the list of stations found 
during scanning will be played. The display will show the station name.

5.  If no signals are found then 'OFF AIR' will be displayed and it may 

be necessary to relocate your clock radio to a position giving better 
reception. You should then carry out a scan to fi nd stations as described 
on page 9.

• 

Your clock radio has an indicator 

 on the display to indicate the 

strength of the DAB radio signal being received.

Note: When fi rst switched on, the radio will set the volume to a moderately 
high level, in case the broadcast is very quiet. After you have set the volume 
using the Volume Up or Down buttons, the radio will remember the setting 
that you have applied for the next time that it is used.

1