Sonic Alert 2.8 Manual De Usuario
7.5
Ethernet MAC Addresses
43
7.5
Ethernet MAC Addresses
Normally, Neon boards come with their MAC addresses pre-programmed
during assembly and test. This is done by using the U-Boot mac command
as shown below.
during assembly and test. This is done by using the U-Boot mac command
as shown below.
Invoked without an argument, the command will display the current
MAC address. Used with a single parameter (MAC address with colons
separating each pair of hex digits), the command will allow (re)programming
of the MAC address.
separating each pair of hex digits), the command will allow (re)programming
of the MAC address.
$ mac
mac address ff:ff:ff:ff:ff:ff
mac address ff:ff:ff:ff:ff:ff
$ mac 00:50:c2:06:30:b8
setting mac address to 00:50:c2:06:30:b8
done
setting mac address to 00:50:c2:06:30:b8
done
December 28, 2005
Revision 2.8