Beko DC 7100 Manual De Usuario

16 EN

This function allows for drying at lower 

temperatures and therefore saves energy.

Warning LED will light up when you select the 

function.

C

 You must use this function when you dry 

your synthetic or delicate laundry.

C

Warning indicators may differ according to the 

model of your dryer.

A warning light will turn on to remind filter 

cleaning after the programme finishes.

C

 If the filter cleaning warning light lights up 

continuously, please refer to, “Suggested 

solutions for problems”.

A

 Warning LED will light up at the end of 

the programme or when the tank is full 

with water. The machine stops operating 

when this warning LED lights up during a 

programme running.  To restart the machine, 

please drain the water in the water tank.  

Press “Start/Pause/Cancel” button to start 

the programme after you have emptied the 

water tank. The warning LED goes off and 

the programme resumes operating.

1.  Press “Start/Pause/Cancel” button to start 

the programme.

2.  Light of the “Start/Pause/Cancel” button will 

turn on to indicate that the programme has 

started.

One of the LEDs is on as far as programme runs 

and shows the approximate remaining time. 

You can use this feature to dry your laundry in 

a different programme after your machine has 

started to run.

For example;

Press and hold the “Start/Pause/Cancel” button 

for about 3 seconds to select “90” minutes 

programme instead of “60” minutes program. 

Select the “90” minutes programme by rotating 

the program knob.

Press “Start/Pause/Cancel” button to start the 

programme.

C 

The program which is selected first will go 

on even if the programme selection button 

is moved and another programme mode 

is selected while the machine is operating. 

You must cancel the ongoing programme in 

order to change the drying programme. (See, 

Ending the programme through canceling)

In order to add or take out laundry after the 

start-up of the programme;

1. Press the “Start/Pause/Cancel” button to 

switch the machine to “Pause” mode. Drying 

process will stop.

2. Open the door at Pause position and close it 

again after adding or taking out laundry.

3. Press “Start/Pause/Cancel” button to start the 

programme.

C

  Any laundry added after the drying process 

was started may cause the already dried 

clothes in the machine intermingle with wet 

clothes and the result will be wet laundry after 

the drying process is over.

There is a childproof lock to prevent any 

programme interruption due to the pressing of 

keys while the programme is on. The loading 

door and all keys except the “On/Off” key on the 

panel are deactivated when the child-proof lock 

is active.

In order to activate the childproof lock, press 

on the “Start/Pause/Cancel” and “Low 

temperature” buttons simultaneously for 3 

seconds. 

To start a new programme after the programme 

is over or to interrupt the programme, the 

childproof lock should be deactivated. To 

deactivate the childproof lock, press the same 

buttons for 3 sec.

C

One of the LEDs on the programme follow-up 

indicator starts flashing when the child-proof 

lock is activated.

C

 Child-proof lock is deactivated when the 

machine is restarted by pressing the On/Off 

button.

The programme which is selected first will keep 

on going even if the position of the programme 

selection button is changed. A new programme 

can be selected and started after “Programme 

cancel” is activated in order to change the drying 

programme.

To can cel any selected programme;

• Press “Start/Pause/Cancel” button for about 

a duration of 3 seconds. The “Filter cleaning”