Hoover VHV 781C Manual De Usuario
DOOR and FILTER
Opening the Door
Pull on handle to open
the door.
the door.
To restart the dryer,
close the door and
press Start/Pause
button .
close the door and
press Start/Pause
button .
WARNING! When the tumble dryer is in
use the drum and door may be VERY HOT.
Never stop a tumble dryer before the end of the
drying cycle unless all items are quickly
removed and spread out so that the heat is
dissipated.
Never stop a tumble dryer before the end of the
drying cycle unless all items are quickly
removed and spread out so that the heat is
dissipated.
Filter Care Indicator
Lights when the
filter needs cleaning.
filter needs cleaning.
If the laundry is not
drying check that the
filter is not clogged.The
indicator will also light
when the venting hose
is blocked or kinked.
drying check that the
filter is not clogged.The
indicator will also light
when the venting hose
is blocked or kinked.
DO NOT USE WATER TO CLEAN THE FILTER.
Filter
IMPORTANT: To maintain the efficiency of the
dryer check that the fluff filter is clean before
each drying cycle.
dryer check that the fluff filter is clean before
each drying cycle.
1.Pull the filter up-
wards.
wards.
2. Open filter as shown.
3.Gently remove lint
using a soft brush or
your fingertips.
using a soft brush or
your fingertips.
4 . S n a p t h e f i l t e r
together and push
back into place.
together and push
back into place.
EN 10
OPERATION
1. Open the door and load the drum with
laundry. Ensure that garments do not hinder
closure of the door.
laundry. Ensure that garments do not hinder
closure of the door.
2. Gently close the door pushing it slowly until
you hear the door 'click' shut.
you hear the door 'click' shut.
3. Turn the Programme Selector dial to select
the required drying programme (see
Programme Guide).
the required drying programme (see
Programme Guide).
4. If drying synthetics, acrylics or delicate items,
press the Acrylic Synthetic button to reduce the
heat level.
The indicator will light up when the machine is in
low heat setting. To deselect in the first few
minutes of the programme, press the Acrylic
Synthetic button , after this time reset the
machine to change the setting.
press the Acrylic Synthetic button to reduce the
heat level.
The indicator will light up when the machine is in
low heat setting. To deselect in the first few
minutes of the programme, press the Acrylic
Synthetic button , after this time reset the
machine to change the setting.
5. Press the Start/Pause button. The dryer will
start automatically and the indicator above the
button will be continuously lit.
start automatically and the indicator above the
button will be continuously lit.
6. If the door is opened during the programme to
check the laundry, it is necessary to press
Start/Pause to recommence drying after the
door has been closed.
check the laundry, it is necessary to press
Start/Pause to recommence drying after the
door has been closed.
7. When the cycle is nearing completion the
machine will enter the cool down phase, the
clothes will be tumbled in cool air allowing the
load to cool down.
machine will enter the cool down phase, the
clothes will be tumbled in cool air allowing the
load to cool down.
8. Following the completion of the cycle the
drum will rotate intermittently to minimize
creasing. This will continue until the machine is
switched OFF or the door is opened.
drum will rotate intermittently to minimize
creasing. This will continue until the machine is
switched OFF or the door is opened.
Do not open the door during the automatic
programs in order to obtain a proper drying.
programs in order to obtain a proper drying.