Clarity XL45 Manual De Usuario

Part 68 of FCC Rules Information
a) This equipment complies with Part 68 of the FCC 
rules and the requirements adopted by the ACTA. On the 
bottom of this equipment is a label that contains, among 
other information, a product identifier in the format 
US:AAAEQ##TXXXX. If requested, this number must be 
provided to the telephone company.
b) A plug and jack used to connect this equipment to the 
premise’s wiring and telephone network must comply with 
the applicable FCC Part 68 rules and requirements adopted 
by the ACTA. A compliant telephone cord and modular plug, 
RJ11C USOC, is provided with this product. It is designed 
to be connected to a compatible modular jack that is also 
compliant. See installation instructions for details.
c) The REN is used to determine the number of devices 
that may be connected to a telephone line. Excessive RENs 
on a telephone line may result in the devices not ringing in 
response to an incoming call. In most but not all areas, the 
sum of RENs should not exceed five (5.0). To be certain of 
the number of devices that may be connected to a line, as 
determined by the total RENs, contact the local telephone 
company. For products approved after July 23, 2001, the REN 
for this product is part of the product identifier that has the 
format US:AAAEQ##TXXXX. 
The digits represented by ## are the REN without a decimal 
point (e.g., 03 is a REN of 0.3). For earlier products, the REN 
is separately shown on the label.
d) If this telephone equipment causes harm to the telephone 
network, the telephone company will notify you in advance 
that temporary discontinuance of service may be required. 
But if advance notice isn’t practical, the telephone company 
will notify customers as soon as possible.  Also, you will be 
advised of your right to file a complaint with the FCC if you 
believe it is necessary.

Part 15 of FCC Rules Information
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference 
that may cause undesired operation.
Your equipment has been tested and found to comply with 
the limits of a Class B digital device, pursuant to Part 15 of 
FCC rules. These limits are designed to provide reasonable 
protection against harmful interference in residential 
installation.
This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that 
interference will not occur in a particular installation; if this 
equipment does cause harmful interference to radio or 
television reception (which can be determined by turning the 
equipment off and on) you are encouraged to try  
to correct the interference by one of the following measures:
1. Where it can be done safely, reorient the receiving 
television or radio antenna.
2. To the extent possible, relocate the television, radio or 
other receiver with respect to the telephone equipment. (This 
increases the separation between the telephone equipment 
and the receiver.)
3. Connect the telephone equipment into an outlet on a 
circuit different from that to which  the television, radio or 
other receiver is connected.
4. Consult the dealer or an experienced radio/TV technician 
for help.  

WARNING: Changes or modifications not expressly 
approved by the manufacturer responsible for compliance 
could void the user’s authority to operate the equipment.

When using your telephone equipment, basic safety 
precautions should always be followed to reduce the risk 
of fire, electric shock and injury to persons, including the 
following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the 
telephone.
3. Do not use this telephone near a bathtub, wash basin, 
kitchen sink or laundry tub, in a wet basement, near a 
swimming pool or anywhere else there is water.
4. Avoid using a telephone (other than a cordless type) 
during a storm. There may be a remote risk of electrical 
shock from lightning.
5. Do not use the telephone to report a gas leak in the 
vicinity of the leak.
6. Unplug this telephone from the wall outlets before 
cleaning. Do not use liquid cleaners or aerosol cleaners on 
the telephone. Use a damp cloth for cleaning.
7. Place this telephone on a stable surface. Serious damage 
and/or injury may result if the telephone falls.
8. Do not cover the slots and openings on this telephone. 
This telephone should never be placed near or over a 
radiator or heat register. This telephone should not be 
placed in a built-in installation unless proper ventilation is 
provided.
9. Operate this telephone using the electrical voltage as 
stated on the base unit or the owner’s manual. If you are 
not sure of the voltage in your home, consult your dealer or 
local power company.
10. Do not place anything on the power cord. Install the 
telephone where no one will step or trip on the cord.
11. Do not overload wall outlets or extension cords as this 
can increase the risk of fire or electrical shock.
12. Never push any objects through the slots in the 
telephone. Such objects can touch dangerous voltage points 
or short out parts that could result in a risk of fire or 
electrical shock. Additionally, never spill liquid of any kind on 
the telephone.

Dispose of used batteries according to the 
instructions.
1. Do not dispose of the battery in a fire as it may explode. 
Check with local codes for possible special disposal 
instructions.
2. Do not open or mutilate the battery. Released electrolyte 
is corrosive and may cause damage to the eyes and skin. 
Additionally, it may be toxic if swallowed.
3. Exercise care in handling batteries in order not to short 
the battery with conducting materials such as rings, bracelets 
and keys. The battery or conduction material may overheat 
and cause burns.

13. To reduce the risk of electrical shock, do not take this 
phone apart. Opening or removing covers may expose you to 
dangerous voltages or other risks. Incorrect reassembly can 
cause electric shock when the appliance is subsequently used.  
14. Unplug this product from the wall outlet and refer 
servicing to the manufacturer under the following conditions:  
when the power supply cord or plug is frayed or damaged; if 
liquid has been spilled into the product; if the telephone has 
been exposed to rain or water; if the telephone does not 
operate normally by following the operating instructions; if the 
telephone has been dropped or the case has been damaged; if 
the telephone exhibits a distinct change in performance.
Adjust only those controls that are covered by the operating 
instructions. Improper adjustment may require extensive work 
by a qualified technician to restore the telephone to normal 
operation.
15. Never install telephone wiring during a lightning storm.
16. Never install telephone jacks in wet locations unless the 
jack is specifically designed for wet locations.
17. Never touch uninsulated telephone wires or terminals 
unless the telephone line has been disconnected at the 
network interface.
18. Use caution when installing or modifying telephone lines.

Part 68 of FCC Rules Information
e) The telephone company may make changes in its facilities, 
equipment, operations or procedures that could affect the 
operation of the equipment. If this happens, the telephone 
company will provide advance notice in order for you to make 
necessary modifications to maintain uninterrupted service. 
f) If trouble is experienced with this telephone equipment, 
for repair or warranty information, please contact Clarity 
at 1-800-426-3738. If the equipment is causing harm to the 
telephone network, the telephone company may request that 
you disconnect the equipment until the problem is resolved.
g) This telephone equipment is not intended to be repaired 
and it contains no repairable parts. Opening the equipment 
or any attempt to perform repairs will void the warranty. For 
service, call 1-800-426-3738.
h) Connection to party line service is subject to state tariffs. 
Contact the state public utility commission, public service 
commission or corporation commission for information.
i) If your home has specially wired alarm equipment 
connected to the telephone line, ensure the installation of this 
telephone equipment does not disable your alarm equipment. 
If you have questions about what will disable alarm equipment, 
consult your telephone company or a qualified installer.
j) This telephone equipment is hearing aid compatible.

Customer-Owned Coin/Credit Card Phones:
To comply with state tariffs, the telephone company must 
be given notification prior to connection. In some states, the 
state public utility commission, public service commission 
or corporation commission must give prior approval of 
connection.

technical specifications.
Before installing this equipment, users should ensure that it 

is permissible to be connected to the facilities of the local 

telecommunications company. The equipment must also be 

installed using an acceptable method of connection. In some 

cases, the company’s inside wiring associated with a single line 

individual service may be extended by means of a certified 

connector assembly (telephone extension cord). The customer 

should be aware that compliance with the above conditions may 

not prevent degradation of service in some situations. Repairs 

to certified equipment should be made by an authorized 

Canadian maintenance facility designated by the supplier. 
Any repairs or alterations made by the user to this equipment, 

or equipment malfunctions, may give the telecommunications 

company cause to request the user to disconnect the 

equipment.
Users should ensure for their own protection that the electrical 

ground connections of the power utility, telephone lines and 

internal metallic water pipe system, if present, are connected 

together. This precaution may be particularly important in rural 

areas.
WARNING: Users should not attempt to make such 

connections themselves, but should contact the appropriate 

electrical inspection authority, or electrician, as appropriate.
The Ringer Equivalence Number is an indication of the 

maximum number of terminals allowed to be connected to a 

telephone interface. The termination on an interface may consist 

of any combination of devices subject only to the requirement 

that the sum of the Ringer Equivalence Numbers of all the 

devices does not exceed five.
(The term “IC:” before the certification/registration number 

only signifies that the Industry Canada technical specifications 

were met.) 

 

The party responsible for regulatory compliance:
Clarity,  a Division of Plantronics, Inc. 

4289 Bonny Oaks Drive   

Chattanooga, TN 37406 

Phone: 1-800-426-3738

The following warranty and service information applies only 
to products purchased and used in the U.S. and Canada. For 
warranty information in other countries, please contact your 
local retailer or distributor.  
Limited Warranty: Clarity, a division of Plantronics, Inc. 
(“Clarity”) warrants to the original consumer purchaser 
that, except for limitations and exclusions set forth below, 
this product shall be free from defects in materials and 
workmanship for a period of one (1) year from the date 
of original purchase (“Warranty Period”). The obligation of 
Clarity under this warranty shall be at Clarity’s option, without 
charge, of any part or unit that proves to be defective in 
material or workmanship during the Warranty Period.
Exclusions from Warranty: This warranty applies only to 
defects in factory materials and factory workmanship. Any 
condition caused by accident, abuse, misuse or improper 
operation, violation of instructions furnished by Clarity, 
destruction or alteration, improper electrical voltages or 
currents, or repair or maintenance attempted by anyone other 
than Clarity or an authorized service center, is not a defect 
covered by this warranty. Telephone companies manufacture 
different types of equipment and Clarity does not warrant that 
its equipment is compatible with the equipment of a particular 
phone company. 
Implied Warranties: Under state law, you may be entitled 
to the benefit of certain implied warranties. These implied 
warranties will continue in force only during the warranty 
period. Some states do allow limitations on how long an 
implied warranty lasts, so the above limitation may not apply 
to you.
Incidental or Consequential Damages: Neither 
Clarity nor your retail dealer or selling distributors has any 
responsibility for any incidental or consequential damages 
including without limitation, commercial loss or profit, 
or for any incidental expenses, expenses, loss of time, or 
inconvenience. Some states do not allow exclusion or 
limitation of incidental or consequential damage, so the above 
limitation or exclusion may not apply to you.

  
Other Legal Rights: This warranty gives you specific legal 
rights and you may also have other rights which vary from 
state to state. 
 
To obtain warranty service, please prepay shipment and return 
the unit to the appropriate facility listed below.
    Clarity Service Center 
    4289 Bonny Oaks Drive
    Chattanooga, Tennessee 37406
    Tel: 423-629-3500 or 800-426-3738 
    Fax: 423-622-7646 or 800-325-8871

    Plantronics Service Centre 
    2732 Etienne Lenoir
    Laval, Quebec H7R 0A3
    Canada
    Tel: 800-540-8363 or 514-956-8363 
    Fax: 514-956-1825
Please use the original container, or pack the unit(s) in a sturdy 
carton with sufficient packing material to prevent damage. 
Include the following information: 
  A proof of purchase indicating model number and date of  
    purchase; 
  Bill-to address; 
  Ship-to address; 
  Number and description of units shipped; 
  Name and telephone number of person to call, should    
    contact be necessary; 
  Reason for return and description of the problem.   
 
Damage occurring during shipment is deemed the 
responsibility of the carrier, and claims should be made directly 
with the carrier.

ClarityLogic is the name of our simplified and easy-to-use 
customer support service. While talking to a Clarity representative, 
the telephone sends information such as its model name and 
settings to Clarity. The representative is immediately aware of 
the type and current settings of the phone. This will allow any 
troubleshooting call to be quick and simple, helping you find exactly 
what you are looking for. Just call 1-877-LOGIC24 (1-877-564-
4224) to find out how Clarity is there to make life easier. 
 
ClarityLogic® Memory Dial
For your convenience, Clarity has pre-programmed the customer 
support number into your phone’s blue ClarityLogic button.  
 

NOTE: ClarityLogic has been designed to work with the Plain Old Telephone 
Service (POTS). If your phone service is provided by a broadband service 
provider, ClarityLogic may not work. ONLY CLARITYLOGIC MAY BE 
DISABLED.  ALL OTHER FEATURES WORK AS DESCRIBED IN THIS USER 
GUIDE.

Your device will automatically send Clarity various types of information as part 
of the Clarity services, which may include the telephone number associated 
with your device. This information may be combined with account and other 
information we have on record regarding your or your device or may be 
transmitted to us by your device. To assist with remote diagnostics and other 
customer services functions, your device may also regularly send us certain 
information associated with your device, including software and hardware 
settings, the phonebook, caller ID history and other information you have 
stored on the device. All of such information, together with other information 
that we have on record regarding you and your device, is collectively referred 
to as the “Subscription Data.” We use this information to diagnose and 
troubleshoot any device issues as well as to provide you with the services.
You agree that Clarity and its subsidiaries, affiliates, partners, suppliers and 
agents (collectively, “Affiliates”) may collect, store, access, disclose, transmit, 
process and otherwise use your subscription data to provide you with the 
Clarity services, address your requests, provide technical support, process 
transactions for your account and otherwise use such subscription data in 
accordance with Clarity’s privacy policy (http://clarityproducts.com/about-
clarity/privacy-policy/), which is hereby incorporated by reference. Clarity may 
also provide or enable certain services through your device that rely upon 
location information. In order to provide such services, Clarity and its Affiliates 
may collect, store, access, disclose, transmit, process and otherwise use your 
location data (including real time geographic information) in accordance with 
Clarity’s privacy policy.

ClarityLogic is the name of our simplified and easy-to-use 
customer support service. While talking to a Clarity representative, 
the telephone sends information such as its model name and 
settings to Clarity. The representative is immediately aware of 
the type and current settings of the phone. This will allow any 
troubleshooting call to be quick and simple, helping you find exactly 
what you are looking for. Just call 1-877-LOGIC24 (1-877-564-
4224) to find out how Clarity is there to make life easier. 
 
ClarityLogic® Memory Dial
For your convenience, Clarity has pre-programmed the customer 
support number into your phone’s blue ClarityLogic button.  
 

NOTE: ClarityLogic has been designed to work with the Plain Old Telephone 
Service (POTS). If your phone service is provided by a broadband service 
provider, ClarityLogic may not work.  
ONLY CLARITYLOGIC MAY BE DISABLED.  ALL OTHER FEATURES WORK 
AS DESCRIBED IN THIS USER GUIDE.

Your device will automatically send Clarity various types of information as part 
of the Clarity services, which may include the telephone number associated 
with your device. This information may be combined with account and other 
information we have on record regarding you or your device or may be 
transmitted to us by your device. To assist with remote diagnostics and other 
customer services functions, your device may also regularly send us certain 
information associated with your device, including software and hardware 
settings, the phonebook, caller ID history and other information you have 
stored on the device. All of such information, together with other information 
that we have on record regarding you and your device, is collectively referred 
to as the “Subscription Data.” We use this information to diagnose and 
troubleshoot any device issues as well as to provide you with the services.
You agree that Clarity and its subsidiaries, affiliates, partners, suppliers and 
agents (collectively, “Affiliates”) may collect, store, access, disclose, transmit, 
process and otherwise use your subscription data to provide you with the 
Clarity services, address your requests, provide technical support, process 
transactions for your account and otherwise use such subscription data in 
accordance with Clarity’s privacy policy (http://clarityproducts.com/about-
clarity/privacy-policy/), which is hereby incorporated by reference. Clarity may 
also provide or enable certain services through your device that rely upon 
location information. In order to provide such services, Clarity and its Affiliates 
may collect, store, access, disclose, transmit, process and otherwise use your 
location data (including real time geographic information) in accordance with 
Clarity’s privacy policy.