ARRI ARRIFLEX 235 Manual De Usuario

To use the ARRIFLEX 235 together with a bridge plate on a 

tripod, it is necessary to bring the camera into the correct 

position to the support rods. To do this, a riser plate is 

mounted to the bottom of the camera onto which the 

bridgeplate can be mounted.

•  Fasten the riser plate with the two mounting screws 

➪ 

 using a 5mm allen key. Both cylindrical pins 

must glide into the holes of the camera bottom.

The bridge plates facilitate balancing of the camera on the 

tripod and mounting of accessories. The BP-8 is designed 

for 19 mm support rods, the BP-9 for 15 mm support rods. 

The bridge plates consist of the base plate  

➪ 

, the 

sliding upper plate 

➪ 

 and a pair of support rods 

➪ 

. In the standard version the support rods are 

440mm long. Optionally, support rods are available in 

the lengths 240mm and 340mm.

base plate

support rods

mounting screws

sliding upper plate