ARRI ARRIFLEX 235 Manual De Usuario

Inching can be started by depressing the “PHASE”-button 

while the camera is in standby. If the “PHASE”-button is 

only briefly depressed, the mirror shutter rotates half a 

revolution to enable an unrestricted view of the film gate 

(e.g. for checking the gate). If the “PHASE”-button is held 

depressed longer, the camera will inch forward at 

approx. 1 fps. The upper line of the display indicates the 

measured shutter angle, the lower line the measured 

voltage of the power supply.

The currently set operational parameters on the ARRIFLEX 

235 are displayed on the camera display 

➪ 

 in 

various modes. The desired mode is selected via the 

“MODE”-button. In each mode the corresponding 

operational parameters can be set using the “SEL”- and 

“SET”-buttons 

➪ 

.

Note: 

The Mode numbers are shown in the display 

between the upper and the lower line. Mode 1 

is also indicated 

➪ 

 in the display by a 

black horizontal bar.

To prevent an unintentional alteration of the operational 

parameters the buttons “SEL”, “SET”, and “PHASE” can 

by locked using the button “LOCK”. If a button is 

depressed when the display is locked, the display will 

show the “OFF” sign. If the display is locked, this is 

indicated by the “LOCK” symbol in the display.

Note: 

Locking the “PHASE”-button has no influence 

on the inching function.