ARRI ARRIFLEX 235 Manual De Usuario

There are normal video and video with data signals 

available from the same pair of connectors.

•  To switch between normal video and video with data, 

use the on-screen program mode. Enter the main menu 

by pressing the Enter/Insert key Ñ for more than 3 

seconds. Go to sub menu VIDEO/TEXT ADJUST. The 

menu line Y/C DATA, which can only be reached if 

BNC OUT is on Y/C, switches between normal video 

and video with data on the Y/C signal. The line 

displays Y/C DATA ON or OFF.

See chapter 10.4 Inserter Facilities for information on the 

on-screen program mode.

In the normal video output almost no electronic information 

is inserted. Only a rolling bar at the lower left corner of 

the video image indicates a running film camera.

In the video with data output, additional data such as 

format marks or camera status information can be inserted.

An adapter from the two BNC connectors to a standard 

Y/C connector is included in the IVS package upon initial 

delivery. Connect the red end to the  È/C output and 

the white end to the É/Y socket 

➪ 

.