JVC LYT0090-001B Manual De Usuario

 EN

This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.

● No function is available without power supply.

● Use only specified power supply.

● Do not use provided power supply units with other

equipment.

SUPPLY POWER

Connect the charger’s AC power cord to a wall outlet.

ATTACH BATTERY PACK

Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.

• The CHG. indicator begins blinking to indicate

charging has started.

DETACH BATTERY PACK

When the CHG. indicator stops blinking but stays lit,
charging is finished. Slide the battery pack opposite the
direction of the arrow.

Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can
result in a camcorder malfunction.

The AC power adapter features a REFRESH
function that allows you to fully discharge
the battery pack before recharging. Perform
the REFRESH function after no less than 5
chargings.

..... attach the battery pack to the adapter

as shown in the above illustration.
Then push REFRESH. The REFRESH
indicator lights when discharging
starts, and goes out when discharging
is complete.

BN-V11U

approx. 1 hr. 10 min.

approx.
3 hrs. 30 min.

BN-V12U

approx. 1 hr. 10 min.

approx.
3 hrs. 30 min.

BN-V18U

approx. 1 hr. 40 min.

approx.
5 hrs. 30 min.

BN-V22U

approx. 2 hrs. 10 min.

approx. 7 hrs.

BN-V25U

approx. 2 hrs. 40 min.

approx. 10 hrs.

ATTACH BATTERY PACK

Hook its top end to the camcorder and push the battery
pack in until it locks in place.

DETACH BATTERY PACK

Slide BATT. RELEASE and pull out the battery pack.

BN-V11U

    —

75

BN-V12U

75 (40)

75

BN-V18U

110 (70)

 —

BN-V22U

150 (95)

150

BN-V25U

200 (120)

200

(   ) : when the video light is on. (GR-AX77 only)