JVC GR-DVL510 Manual De Usuario

 EN

● In order to maintain optimum performance of the

camcorder, provided cables may be equipped with
one or more core filter. If a cable has only one core
filter, the end that is closest to the filter should be
connected to the camcorder.

● It is recommended to use the AC Adapter as the

● Never connect the USB or PC connection cable and

● If the PC connected to the camcorder via the USB

cable is not powered, the camcorder does not enter
the USB mode.

● The date/time information cannot be captured into the

PC.

● Refer to the instruction manuals of the PC and Software.

● The still images can also be transferred to a PC with a

DV connector-equipped capture board.

● When using a DV cable, be sure to use the optional

● The system may not work properly depending on the

PC or capture board you are using.

This camcorder can transfer still images to a PC by
using the provided software.

It is also possible to transfer still images to a PC with
a DV connector by using software equipped with the
PC or commercially available software.

Make sure the camcorder and PC are turned off.

Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.

 If

you are using the USB connection, set the
VIDEO/DSC switch to “DSC”.
•Only the still images stored in the memory

card can be transferred to a PC.

Turn the camcorder’s Power Switch to “

”

while pressing down the Lock Button located on
the switch and turn on the PC.
•Refer to the instruction manual of the software

on how to transfer a still image to the PC.

When finished, turn off the PC first, then the
camcorder.

“USB MODE” and/or “ACCESSING FILE” appears
on the LCD monitor while the PC is accessing data
in the camcorder or the camcorder is transferring a
file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILE” is displayed on the LCD
monitor since this can result in product damage.