Kodak ZM1 Manual De Usuario

14

■

If using this product in an airplane, observe all instructions of the airline.

■

For more information, go to 

.

■

Before inserting or removing a card, make sure your hands, the camera, and the 
card are completely dry.

■

If water has entered the camera, remove the card. Allow all components to air-dry 
for at least 24 hours before using the camera.

■

Wipe off dirt or sand from the door seals—debris could compromise the seal and 
cause a leak in water.

■

Do not subject the camera to temperatures lower than 0 (32

°

F) or higher than 

40

°

C (104

°

F) for an extended time—the integrity of the seals may be 

compromised. Wait until camera reaches operating temperatures before using.

■

Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft, 
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions 
unless designed specifically for camera lenses. Do not allow chemicals, such as 
suntan lotion, to contact painted surfaces.

■

Service agreements may be available in your country. Contact a dealer of KODAK 
Products for more information.

■

For camera disposal or recycling information, contact your local authorities. In the 
US, go to the Electronics Industry Alliance Web site at 

 or Kodak at 

.

Kodak warrants its digital cameras and accessories (excluding batteries) to be free 
from malfunctions and defects in both materials and workmanship for the warranty 
period specified on your KODAK Product packaging. Retain the original dated sales 
receipt. Proof of purchase date is required with any request for warranty repair.