Nikon P310 Guía Del Usuario

Scene Mode (Shooting Suited to Scenes)

Sh
ooting Feat

ures

• “Features That Can Be Set Using the Multi Selector“ (

A59) vary with scene 

mode. See “List of the Default Settings” (

A69) for more information.

• Functions that can be set using the 

d

 button: The image quality and image 

size can be set (

• Use of a tripod is recommended in scene modes with 

O indicated. Set 

Vibration reduction in the setup menu (

A98) to Off when using a tripod to 

stabilize the camera.

• For scene modes that use the flash, be sure to slide the 

K (flash pop-up) 

control to raise the flash before shooting (

j Night landscape
Use this mode to capture the atmosphere of night landscapes.
Press the 

d button to select Hand-held or Tripod in Night 

landscape.

• Hand-held (default setting): This enables you to shoot with the minimum of camera 

shake and noise even when holding the camera by hand.
- The Y icon is displayed on the shooting screen.
- When the shutter-release button is pressed all the way, pictures are shot continuously, 

and the camera combines these pictures to save a single picture.

- Once the shutter-release button is pressed all the way, hold the camera steady without 

moving it until a still picture is displayed. After taking a picture, do not turn the camera 
off before the monitor switches to the shooting screen.

- The angle of view (image area) seen in the saved image will be narrower than that seen 

on the monitor at the time of shooting.

• Tripod: Select this mode when the camera is stabilized, such as with a tripod.

- The Z icon is displayed on the shooting screen.
- Vibration reduction (

99) is automatically set to Off regardless of the applied 

option in the setup menu.

- Press the shutter-release button all the way to shoot a single picture at slow shutter 

speeds.

• When the shutter-release button is pressed halfway, the focus area or focus indicator 

A6) always lights in green.