Philips VCM7177 Manual De Usuario
Changing a lens
Perform the following steps to change a lens:
•
Point the camera downwards. This to minimize possible deposit of dust on the inside of the
camera when the lens is removed.
camera when the lens is removed.
•
Remove the old lens by turning it
counter-clockwise (1).
Do not release the back-focus locking ring (2),
otherwise you may have to readjust the
back-focus of the camera.
Caution: Never touch the CCD sensor which is
located at the inside of the camera. Only use clean,
dry air to blow particles from the surface of the sensor.
counter-clockwise (1).
Do not release the back-focus locking ring (2),
otherwise you may have to readjust the
back-focus of the camera.
Caution: Never touch the CCD sensor which is
located at the inside of the camera. Only use clean,
dry air to blow particles from the surface of the sensor.
•
Mount the new lens by turning it clockwise
onto the lens mount of the camera.
onto the lens mount of the camera.
•
Direct the camera at the object or area to be monitored (6).
•
Tighten the knob (3) and screw (4) when the camera is in position.
•
Adjust the focus ring (1) of the camera lens to obtain an optimal image sharpness.
Remark: If an auto-iris lens is used, connect the auto-iris cable to the camera (5).
Remark: If an auto-iris lens is used, connect the auto-iris cable to the camera (5).
CL 66610005_312.AI
R
A
E
N
>
<
R
A
F
2
1
CL 66610005_313.AI
R
A
E
N
>
<
R
A
F
5
1
6
4
3
11
g