Philips VCM7177 Manual De Usuario
Camera position
1
Take the camera, system cable and monitor to the area you want to observe (with the monitor
on site, you can check whether the camera covers the required area).
Remark: For outdoor use protective camera housing has to be used to protect the camera from rain
and snow.
on site, you can check whether the camera covers the required area).
Remark: For outdoor use protective camera housing has to be used to protect the camera from rain
and snow.
2
Connect the camera to the system monitor (1).
3
Connect the system monitor to the mains (2).
4
Switch on the mains power switch (3).
The monitor will check the system. After about 30 seconds or when a key is pressed the camera
image will appear on the monitor screen.
image will appear on the monitor screen.
5
If necessary adjust contrast
T/brightness ( and/or colour S (controls at the front of the
monitor) to optimise the camera image.
CL 66610005_314A.AI
1
3
max 24V 2A
out
alarm gnd
power
1
2
3
4
camera in
in
out
VCR
out
aux
video
audio
out
slave
2
g
6