John Deere AC-G13010S Manual De Usuario

Preparing the Generator

Operator’s Manual

ENGINE OIL

Oil is a major factor affecting performance and service life.

Use 4-stroke automotive detergent oil.

Recommended Oil: Use 4-stroke motor oil that meets or

exceeds the requirements for API service classification

SJ, SL, or equivalent. Always check the API service label

on the oil container to be sure it includes the letters SJ,

SL, or equivalent.

SAE 10W-30 is recommended for general use. Other

viscosities shown in the chart may be used when the

average temperature in your area is within the indicated

range. (Fig. 1)

CAUTION: THIS ENGINE CRANKCASE IS NOT

FILLED WITH OIL AT THE FACTORY, SO BE

SURE TO FILL IT BEFORE OPERATING THE

ENGINE.

ENGINE OIL CAPACITY

To fill with oil:

1. Level the engine to ensure accurate inspection and

to prevent overfilling.

2. Remove the dipstick and wipe it clean.
3. Fully insert the dipstick, then remove it to check the oil

level.

4. If the oil level is low, remove the oil filler cap, and fill to the

upper limit mark on the dipstick with the recommended

oil. (Fig. 2)

5. Reinstall the dipstick and filler cap.

NOTE: Running the engine with a low oil level can cause

engine damage.

The Oil Alert system (applicable types) will

automatically stop the engine before the oil level

falls below the safe limit. However, to avoid the

inconvenience of an unexpected shutdown, always

check the engine oil level before startup.

(Fig. 1)

(Fig. 2)

MODEL #

Liters

Quart

Ounces

AC-G13010SE

1.5

1.6

52.5

AC-G14010HE

1.8

1.9

60.9

TEMPERATURE CHART