Fujifilm 4700 Manual De Usuario
3
65
64
b SELF-TIMER PHOTOGRAPHY
1
●
!
Check that the lens is clean. If it is dirty, clean the
lens as described on P.106.
lens as described on P.106.
●
!
You can also use the Framing Guideline Function.
(
(
In the “
3
”, “
7
”, “
6
”, “
8
”, “
4
” and “
5
”
modes, holding down the “SHIFT/
r
”button
button and pressing “
b
” on the 4-direction
button switches the mode to self-timer
photography.
Repeat the operation to cancel self-timer mode.
photography.
Repeat the operation to cancel self-timer mode.
Position the AF frame over the subject and
press the shutter button. The camera focuses on
the subject in the frame and self-timer starts to
run.
press the shutter button. The camera focuses on
the subject in the frame and self-timer starts to
run.
●
!
●
!
Be careful not to stand in front of the camera when
you press the shutter button as this can cause
focusing or light metering errors.
you press the shutter button as this can cause
focusing or light metering errors.
2
3
The self-timer lamp lights for 5 seconds and
then blinks for 5 seconds, then the camera takes
the picture.
then blinks for 5 seconds, then the camera takes
the picture.
●
!
To stop the self-timer, once it has started running,
press the “CANCEL/BACK” button.
press the “CANCEL/BACK” button.
4
The time until the shutter releases is shown as a
countdown bar on the LCD monitor and LCD
panel.
Self-timer mode is automatically cancelled after
each shot.
countdown bar on the LCD monitor and LCD
panel.
Self-timer mode is automatically cancelled after
each shot.
●
!
You can check the countdown on the LCD panel
when the LCD monitor is switched off.
when the LCD monitor is switched off.