Fujifilm Zoom Date 160ez Manual De Usuario
12
2
LOADING THE BATTERY
Your camera requires one 3V lithium
battery, type CR2/DL CR2.
battery, type CR2/DL CR2.
1
Move the battery cover release
knob in the direction of the arrow.
knob in the direction of the arrow.
2
Flip open the battery cover.
3
Load the battery,
- end first fol-
lowing the instructions shown in
the drawing on the inside of the
battery cover.
the drawing on the inside of the
battery cover.
Important: Pay careful attention to the polari-
ty of the battery as indicated by the
ty of the battery as indicated by the
= and
- signs on the battery. The battery must be
loaded the correct way or the camera will not
work.
loaded the correct way or the camera will not
work.
4
When the battery is loaded cor-
rectly, close the battery cover by
pressing it until it snaps into place.
If it does not snap into place, do
not force it but recheck the posi-
tion of the batteries.
rectly, close the battery cover by
pressing it until it snaps into place.
If it does not snap into place, do
not force it but recheck the posi-
tion of the batteries.
0
1
0
2
0
3
0
4
/One new lithium battery should be
enough for about 200 pictures (based
on our test conditions).
on our test conditions).
/When traveling, take extra batteries in
the event the batteries stop working.
This is important if you visit areas where
new batteries may be difficult to get.
This is important if you visit areas where
new batteries may be difficult to get.
/After changing the battery, reset the
date to get the right date/time record-
ing (
ing (
➜p.14).
2Do not apply force to the battery cover.