JVC LYT0633-001A Manual De Usuario

EN

1

PC Connector [DIGITAL STILL] ............

 pg. 40

2

J Terminal/Edit Connector
[JLIP (Joint Level Interface Protocol)
(EDIT)] ................................................

 pg. 49

•Connect to a JLIP-compatible camcorder or

VCR to control it from the computer using the
provided Software.

NOTE:
Make sure that the camcorder is turned on while
connecting the camcorder to a PC using the
Docking Station’s JLIP connector. If the camcorder
is turned off (because the POWER Switch is set to
“OFF” or due to Auto Shut Off* etc.) while the JLIP
programme software is used, it will be impossible
to control the connected devices from the
computer. In such a case, first try turning the
camcorder on again, or unplug the JLIP connection
cable from the Docking Station’s JLIP connector.
Then, initialise or run the software again.
* Auto Shut Off:

If 5 minutes elapse in the Record-Standby mode
or in the Pause mode, the camcorder’s power
shuts off automatically to conserve energy.

•Connect the editing cable when performing

Random Assemble Editing .........

 pg. 48 – 53

4

5

6

1

3

0

2

7

8

9

3

External Stereo Microphone Input
Connector [MIC] .................................

 pg. 54

4

Stud ....................................................

 pg. 38

5

Screw ..................................................

 pg. 38

6

Multi Connector
The Docking Station can be connected with this
camcorder through this connector. Never touch it
with your hand or hit it with a hard object; if the
pins are damaged, the connectors will become
unusable due to contact failure.

7

S-Video Output Connector
[S] .................................................

 pg. 38, 49

8

Video Output Connector
[VIDEO] ........................................

 pg. 38, 49

9

Audio Output Connectors
[AUDIO L/R] .................................

 pg. 38, 49

0

Screw Knob .........................................

 pg. 38

To attach the camcorder, tighten this clockwise.