Ricoh 06578 Manual De Usuario

3

48

Shooting

3

To compensate the flash 

output or when K is 

selected, press B and then 

use V to adjust the value.

Press M to reset to the default 

setting.

4

Press E.

The camera returns to standby mode.

5

Press 1.

The built-in flash is popped up.

t Memo

• The flash modes that can be selected vary depending on the 

capture mode.

*1 The flash is not available in some scene modes. (p.88)

• You cannot take pictures while the flash is being charged. 

If you want to take pictures while charging the flash, 

set [20 Release While Charging] in the E3 menu.

• Depending on the lens being used, the use of the built-in flash 

• When the built-in flash is used in J mode, the shutter speed 

automatically changes over a range from 1/180 seconds to 

a slow shutter speed depending on the lens being used. 

The shutter speed is locked at 1/180 seconds when a lens 

other than a DA, DA L, D FA, FA J, FA or F lens is used.

• When the built-in flash is used in I, K or L mode, any 

desired shutter speed of 1/180 seconds or slower can be set.

• The built-in flash is optimum for a subject at a distance from 

approx. 0.7 m to 5 m. Vignetting may occur when used at 

a distance closer than 0.7 m (this distance varies slightly 

depending on the lens being used and the sensitivity setting).

• For details on using an external flash, refer to “Functions 

Capture Mode

Selectable Flash Mode

R

, S

A, B, C, D

W

, G, H, J

C, D, E, F, H, K

I

, K, L, M

C, D, G, K

Auto Flash Discharge

Auto Flash Discharge

Cancel

Cancel

OK

OK

Sensitivity

Guide 

Number

Sensitivity

Guide 

Number

ISO 100

Approx. 10

ISO 3200

Approx. 56.6

ISO 200

Approx. 14.1

ISO 6400

Approx. 80

ISO 400

Approx. 20

ISO 12800

Approx. 113

ISO 800

Approx. 28.3

ISO 25600

Approx. 160

ISO 1600

Approx. 40

ISO 51200

Approx. 226

e_kb558_om.book  Page 48  Tuesday, September 16, 2014  11:59 AM