Sony DSC-V3 Manual De Usuario

Each time you press NIGHTFRAMING/
NIGHTSHOT, this function changes 
cyclically in the following order:
NightFraming 

 NightShot  off

•  The infrared ray light reaches within approx. 

2.3 m (90 5/8 inches) (W)/2.2 m 
(86 5/8 inches) (T).

The NightFraming function enables you 
to check a subject even at night and then 
record with natural colors using the fl ash.

  Set the mode dial to   or P.

  Select NightFraming with 

The 

 and “Night Framing” 

indicators light. The “Night Framing” 
indicator turns off after fi ve seconds.

101

  Press and hold the shutter 

The focus is automatically adjusted.

  Press the shutter button fully 

The shutter sounds, the fl ash strobes 
and the image is recorded.

Release the NightFraming function with 
NIGHTFRAMING/NIGHTSHOT in step 
.

•  While using the NightFraming function:

– The white balance is set to Auto.
– The metering mode is set to multi-pattern 

metering.

– The AF range fi nder frame is not displayed. 

The centrally-located subject has priority to 
focus on.

– If you perform any invalid operation while 

using the NightFraming function, the 

 

indicator fl ashes and the “Night Framing” 
indicator lights for about fi ve seconds.

•  When using the NightFraming function, you 

cannot use the following functions.
– Turning the LCD screen off
–  AE lock
–  Focus preset

•  When you press the shutter button halfway 

down, you will hear a sound, but this is not the 
sound of the shutter releasing. The image is not 
recorded yet.

•  When [Hologram AF] is set to [Off], you may 

not get a clear focus. Setting [Hologram AF] to 
[Auto] is recommended (page 140).

•  When using the following functions, you 

cannot use the NightFraming function.
– Exposure Bracket
– Burst
– Multi Burst