Sanyo VPC-E2100 Manual De Usuario

There are two ways to turn on the camera: 
• The startup image displays briefly and the startup sound plays if enabled. The zoom lens extends and 

the camera is turned on in Record mode. 

• The camera is turned on in Playback mode. The zoom lens is not extended.

To turn off the camera, press the Power button.
See "Modes" on page 17 to know more about Record and Playback mode.

Please remove the lens cover before doing Power on.

When you turn on your camera for the first time, you will be asked to do the initial settings of your camera.
First is the setup of language menu. Specify in which language menus and messages are to be displayed on 
the LCD monitor.

Setting the Language

1. Press 

,

,

 or 

to move through the selection. 

2. Select a language, and then press OK to apply. 

Setting the Date & Time

1. Press 

 or 

to move through the selection. 

2. Press 

 or 

keys to change the value for the date and time. 

3. Press OK to apply. 

4. If necessary, press

to close the menu. 

Now, you are ready to start taking images and videos. 

Holding down

 or 

keys to change the values continuously.

Your camera has three modes:

This is the default mode while you turn on the camera every time. You are able to take images and 

record audio clips in this mode. 

Press the Playback button

after the camera is turned on to view and edit captured images or

playback videos and audio clips. The recording of voice memo attached to images is available in this 
mode.

Press the Movie button

after the camera is start/stop recording video in this mode. 

17