Unibrain 511 Manual De Usuario

Unibrain Fire-i 501/511/601/701/702/810 Operation Manual 

 

Page 39 

 

 

Trigger mode 13 is only supported on Fire-i 701/702/810 cameras. The user can capture the multi frame rates with 

one trigger signal.  The users can control the Gain and Shutter by the Parameter Table which has a range from 1 to 

255.  However, we recommend the trigger mode 12.  Trigger mode 13 has approximately a 2.5msec delay time so 

that it is not recommended.    Mode 13 is supported by both H/W trigger and S/W trigger. 

 

This mode is “preset multiple shutter mode with a single trigger”.     

This mode is similar to “trigger mode 4” but the difference is that all the parameter is preset by the users using only a 

single trigger. “Exposure Number”, “Exposure Duration”, and “Exposure Interval” are the parameters required for this 

mode.  However, the exposure duration and interval in each multiple shutter is equal and cannot be different.  

Exposure duration & interval is defined by the user defined 1394 address (0xF2F10114)