VistaQuest VQ350 Manual De Usuario

 

7. AVI Capture (continued)   
Step 1: Power on VQ350.    Press the Mode Button until the “            ” icon appears on the LCD   
              display. 
Step 2: Once the Shutter Button is pressed, VQ350 will beep and the camera starts recording   
       videos continuously until the button is released. 
Step 3: Release the Shutter  Button to stop recording.  VQ350 will stop recording 

automatically when the built-in memory is full.  When the built-in memory is full, the 
word    “FL” will be shown on the LCD display.   

 
8. Continuous Capture   
You can capture 3 images using the continuous capture feature.  When you use this mode 
the image resolution will be 640 x 480.  To use the Continuous Capture mode follow these 
steps: 
Step 1:  Power on VQ350.  Press the Mode Button until the  “      “ icon appears on the 

LCD display. 

Step 2:  Press the Shutter Button and the VQ350 will capture 3 images continuously. 
 
9. Deleting Images   
You can delete the last image captured or you may delete all images in memory. 
 
9.1 Delete the Last Image   
Step 1:  Power on VQ350.  Press the Mode Button until the “      ” icon appears on the 

LCD display. 

Step 2:  Press the Shutter Button to delete the last picture. The image will be deleted and the   
        image counter will decrease by one.    (Example: 020 will change to 019.) 
 
9.2 Delete All Images   
Step 1:  Power on VQ350.  Press the Mode Button until the “     ” icon appears on the 

LCD display. 

Step 2:  Press the Shutter Button The image counter will flash “on” and “off.” Press the   
                Shutter Button again to delete all images. 
Step 3:    All Images will be deleted and the image counter will display “000.”