VistaQuest VQ-7228 Manual De Usuario
- 9 -
• Turning On the Camera:
1.Press the Power button on as shown in the illustration.
2.Buzzer will beep and indicator lamp will light. The TFT panel will be
1.Press the Power button on as shown in the illustration.
2.Buzzer will beep and indicator lamp will light. The TFT panel will be
turned on.
3.Press the Power button again to shut down the camera.
• Setting Time and Date:
Use the following procedure to change the date and time setting.
1.Press the Power button open the camera, the TFT Panel will display
2.Press the Menu button to turn on function menu.
3.Push the joystick to enter [Setup] menu, then push the joystick
• Setting Time and Date:
Use the following procedure to change the date and time setting.
1.Press the Power button open the camera, the TFT Panel will display
2.Press the Menu button to turn on function menu.
3.Push the joystick to enter [Setup] menu, then push the joystick
up or down to select [Date Input]. Press the OK button to and you
will see the menu” Off/Set”. Push the joystick down to select [Set] and then press the OK
button to enter the menu.
will see the menu” Off/Set”. Push the joystick down to select [Set] and then press the OK
button to enter the menu.
4.Push the joystick up or down to adjust the date format to MM/DD/YYYY, DD/MM/YYYY or
YYYY/MM/DD. Push the joystick left or right to advance to the next setting and then push the
joystick up or down to adjust the date and time.
joystick up or down to adjust the date and time.
5.When finished, press the OK button to confirm the setting and return to main menu.
Use the Date Stamp setting to imprint the date on your pictures.
In the Date Time Setting menu. Make sure the camera clock is set to the correct date.
1. Press the Power button open the camera, show on the TFT Panel
2. Press the Menu button and then push the joystick up or down to select [Time Stamp] option.
3. Press the OK button to activate the submenu.
4. Push the joystick up or down to select [Date Only] or [ Date&Time], press the OK button
Use the Date Stamp setting to imprint the date on your pictures.
In the Date Time Setting menu. Make sure the camera clock is set to the correct date.
1. Press the Power button open the camera, show on the TFT Panel
2. Press the Menu button and then push the joystick up or down to select [Time Stamp] option.
3. Press the OK button to activate the submenu.
4. Push the joystick up or down to select [Date Only] or [ Date&Time], press the OK button
button to confirm the setting.
5. Push the joystick left button to exit the menu.