Veo Observer Manual De Usuario

Page 7 of 65 

Before installing the Veo Observer Camera, you should have an available Ethernet 
LAN connection (RJ-45 port).  To view the camera’s image or make any manual 
configuration changes, you will need a Windows PC with Internet Explorer 5.0 or 
higher, also connected to the LAN.  

 

 

 

 

Chapter 

2 

 

 
CAUTION: Make sure to only use the power 
adapter supplied with your Veo Observer 
Network Camera. Using a non-approved power 
adapter may damage the camera. 
 

Step 1. Plug the included Ethernet cable into the RJ-
45 connector at the back of the camera as shown. 

Step 2. Plug the other end of the Ethernet cable into 
any available LAN port.  A typical home 
router/gateway connection is shown on the left. 

Step 3. Connect the power supply to the back of the camera as 
shown, and then plug the supply into an available power outlet.