Panasonic DMC-GM1 Manual De Usuario

198

9. Stabilizer, Zoom and Flash

Applicable modes:

Sets the screen display and lens operations when using an interchangeable lens that is
compatible with power zoom (electrically operated zoom).
This may only be selected when using a lens that is compatible with power zoom
(electrically operated zoom).
•

The interchangeable lenses (H-FS12032/H-H020A) are not compatible with power zoom.

(For compatible lenses, please refer to our website.)

Changing the settings for a power zoom lens

[MENU]

[Custom]

> [Power Zoom Lens]

[Disp Focal
Length]

When you zoom, the focal distance is
displayed and you can confirm the zoom
position.
A Focal distance indication
B Current focal distance
[ON]/[OFF]

[Step Zoom]

When you operate the zoom with this setting
[ON], the zoom will stop at positions
corresponding to predetermined distances.
C Step zoom indication

•

[Step Zoom] is disabled during motion
picture recording.

[ON]/[OFF]

[Zoom Resume]

When you turn this unit on, the zoom positions when you last turned this unit
off are automatically restored.
[ON]/[OFF]

[Zoom Speed]

You can set the zoom speed for zoom operations.

•

If you set [Step Zoom] to [ON], the zoom speed will not change.

[Photo]:
[H] (High speed)/[M] (Middle speed)/[L] (Low speed)
[Video]:
[H] (High speed)/[M] (Middle speed)/[L] (Low speed)

[Zoom Ring]

This may only be selected when a power zoom-compatible lens with a zoom
lever and zoom ring is attached.
When set to [OFF], the operations controlled by the zoom ring are disabled
to prevent accidental operation.
[ON]/[OFF]