Panasonic DMC-GM1 Manual De Usuario
326
14. Others
•
When a high ambient temperature, continuous recording in Burst Mode or of a motion picture,
continuous use of a Wi-Fi connection or other conditions are causing the camera to overheat,
[
continuous use of a Wi-Fi connection or other conditions are causing the camera to overheat,
[
] flashes. If a message is displayed after [
] flashes, the camera will turn off
automatically to protect itself. When this happens, some functions will be disabled until the
camera cools down.
camera cools down.
•
Is the subject focused?
> [Focus/Release Priority] is set to [FOCUS] at the time of purchase, and so you cannot take
> [Focus/Release Priority] is set to [FOCUS] at the time of purchase, and so you cannot take
•
Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
cloth.
> Refer to
•
•
Is the AE Lock
applied incorrectly?
•
Cancel the following settings:
–
Burst/Auto Bracket/[
–
Recording
This unit suddenly turns off during recording.
Taking pictures is not possible.
The shutter will not operate immediately when the shutter button is pressed.
The shutter will not operate immediately when the shutter button is pressed.
The recorded picture is whitish.
The recorded picture is too bright or dark.
Multiple pictures are taken at one time.