Panasonic WV-CW964 Manual De Usuario

■ Using the Camera Setup Menu 

Display the camera setup menu from the setup
menu (Advanced Menu) to configure camera
settings (page 25). 

1. Display the setup menu (page 25), move the cursor to

CAMERA 

O, and then press the CAM (SET) button. 

This will display the camera setup menu. 

* The following sections numbered 

q to  !3 explain

how to use each of the camera setup menu items. 

See page 22 for information on the camera ID
settings method. The factory default setting is OFF.

1. Move the cursor to ALC/MANUAL, and then tilt the

joystick left or right to toggle between ALC and
MANUAL. 
ALC

: Enables automatic lens iris adjustment in

accordance with subject brightness.
Select this ALC when using SUPER-D 

3.

This is the factory default setting.

MANUAL: Adjust the lens iris with the IRIS button on

the system controller. Fixes the lens iris.

The backlight compensation submenu

associated with this menu is described separately
and should be set up after installing the camera at
the site and observing the actual site picture.

2. If ALC is set in step 1, press the CAM (SET) button

to set SUPER-D 

3. 

3

3 (Super Dynamic 3

3) 

When there is wide variation between the illumination of
light and dark areas of the location being monitored,
the camera adjusts the lens iris in accordance with the
bright areas. This causes loss of detail in dark areas.
Conversely, adjusting lens brightness for the dark
areas cause brighter area to become washed out.

SUPER-D 

3 digitally combines an image that is set up

for a clear view of bright areas with an image that is set
up for a clear view of dark areas, creating a final image
that preserves overall detail. 

• SUPER-D 

3 is supported only when ALC is

selected for light control (ALC/MANUAL). 

• Camera settings are limited to the following when

SUPER-D 

3 is turned on. 

SHUTTER : OFF, AUTO (page 27) 
SENS UP : OFF, AUTO (page 27) 

• If lighting conditions cause either of the following

phenomena, turn off SUPER-D 

3. 

(1) Screen flickering or abnormal color
(2) Digital noise in the bright areas of the screen

3. Move the cursor to SUPER-D3, and then tilt the

joystick left or right to toggle between on and off.  
ON : Turns on SUPER-D 

3. (Go to Step 6) 

OFF : Turns off SUPER-D 

3. (Go to Step 4) 

This is the factory default setting.

4. Move the cursor to MASK SET 

O, and then press

the CAM (SET) button. 
This will display the mask area screen, with the
cursor in the upper left cell. 

5. Mask the cells in the area where background

lighting is bright. Masking an area will cause its
brightness level to be ignored. 
Use the following steps to perform masking 

(1) Tilt the joystick up and down, and left and right

to move the cursor to a cell you want to mask.

-26-

q
e
t
u
o
!1

w
r
y
i
!0

×

!2 !3

Loss of detail  
in dark areas...

Wash out of  
bright areas ...

Two images  
digitally combined  
to create a clear  
final image

•I••••• 64
-     +

 WV-CW964  05.10.18  11:09 AM  ページ26