Panasonic PAJ- AJ- P Manual De Usuario
– 12 –
Controls and Their Functions
Audio Function Section (1)
r
AUDIO LEVEL CH1 (audio channel 1 recording level) control
When the AUDIO SELECT CH1/CH2 switch
When the AUDIO SELECT CH1/CH2 switch
u
is set to MAN, the recording level of audio
channel 1 can be adjusted by this control in addition to the AUDIO LEVEL CH1 control
t
on
the side panel.
s
MIC IN (microphone input) jack (XLR, 3-pin)
Connect an optional microphone to this jack. The power for the microphone is supplied from
this jack.
Connect an optional microphone to this jack. The power for the microphone is supplied from
this jack.
t
AUDIO LEVEL CH1/CH2 (audio channel 1/2 recording level) controls
When the AUDIO SELECT CH1/CH2 switch
When the AUDIO SELECT CH1/CH2 switch
u
is set to MAN, the audio level of audio chan-
nels 1 and 2 can be adjusted using these controls.
However, the audio CH1 level can also be adjusted using the AUDIO LEVEL CH1 control
However, the audio CH1 level can also be adjusted using the AUDIO LEVEL CH1 control
r
on the front panel.
u
AUDIO SELECT CH1/CH2 switch (audio channel 1/2 auto/manual level adjustment se-
lector) switch
This selects the method used to adjust the audio levels of audio channels 1 and 2.
AUTO: For adjusting the levels automatically.
MAN:
lector) switch
This selects the method used to adjust the audio levels of audio channels 1 and 2.
AUTO: For adjusting the levels automatically.
MAN:
For adjusting the levels manually.
v
AUDIO IN (audio input selector) switch
This selects the input signals to be recorded on audio channels 1 and 2.
FRONT [MIC]: The microphone input signals connected to the MIC IN jack
This selects the input signals to be recorded on audio channels 1 and 2.
FRONT [MIC]: The microphone input signals connected to the MIC IN jack
s
are recorded.
REAR [MIC]:
The microphone input signals connected to the AUDIO IN CH1/CH2 connec-
tors
tors
y
are recorded.
REAR [LINE]:
The line input signals connected to the AUDIO IN CH1/CH2 connectors
y
are recorded.
w
REAR MIC POWER switch
ON:
ON:
The phantom power is supplied to the rear microphone.
OFF:
The phantom power is not supplied to the rear microphone.
x
CUE switch
CH1:
CH1:
The audio CH1 signals are recorded on the cue track.
1/2:
The signals of audio CH1 and CH2 are mixed together and recorded on the cue track.
CH2:
The audio CH2 signals are recorded on the cue track.
y
AUDIO IN CH1/CH2 (audio input channel 1/2) connectors (XLR, 3P)
An audio component or microphone is connected here.
An audio component or microphone is connected here.
z
AUDIO OUT connector (XLR, 3P)
This is connected to an audio component. The audio channels are coupled to the MONITOR
SELECT switch
This is connected to an audio component. The audio channels are coupled to the MONITOR
SELECT switch
and switched in tandem.
{
DC OUT (DC power output) connector
This is the DC 12 V output connector. A current of approximately 100 mA can be taken out.
This is the DC 12 V output connector. A current of approximately 100 mA can be taken out.
s
r