Panasonic DMC-TZ10 Manual De Usuario

Descargar
Página de 178
102   
VQT2R48
VQT2R48
   103
For [REC] menu setting procedures (→20)
Using the [REC] menu
 
(Continued)
   [I.EXPOSURE]
Automatically adjusts contrast and exposure to give more lifelike colours when there is 
significant contrast between background and subject.
 
Recording Mode:  
 
 
 
 
 
 
 
 
 
 
Settings:  [OFF]/[LOW]/[STANDARD]/[HIGH]
 
[LOW], [STANDARD] and [HIGH] indicate the amount of correction. 
 
If the setting is other than [OFF], 
 is displayed on the screen.
 
When [I.EXPOSURE] works, the colour of 
 changes.
 
Even if [SENSITIVITY] is set to [80] or [100], when [I.EXPOSURE] is activated, pictures 
may be taken at a higher sensitivity than the setting.
 
Correction effects may not be achieved under certain conditions.
   [MIN. SHTR SPEED]
Sets shutter speed to minimum. We recommend using slower shutter speeds to take 
brighter pictures in dark locations.
 
Recording Mode: 
 
Settings: [AUTO]  [1/250]  [1/125]  [1/60]  [1/30]  [1/15]  [1/8]  [1/4]  [1/2]  [1]
 
Slower shutter speeds allow for brighter pictures but increase risk of jitter, so we 
recommend using a tripod and the self-timer.
 
As still pictures may become dark when using faster values such as [1/250], we 
recommend that still pictures are taken in bright locations (
 flashes red when shutter 
button is half-pressed if still picture will be dark).
 
 displayed on screen for settings other than [AUTO].
   [BURST]
Enables a rapid succession of still pictures to be taken. Succession of still pictures taken 
while shutter button is held down.
 
Recording Mode: 
 
 
 
 
 
 
 
Settings:
[BURST] setting
Speed
No. of pictures
[OFF]
No burst
(Burst)
2.3 pictures/sec.
 Fine: Max. 3
 Standard: Max. 5
∗ When using self-timer: Fixed at 3 pictures
 
Focus, exposure and White Balance are fixed in the first picture. 
 
Burst speed may be reduced if [SENSITIVITY] is set to high, or if shutter speed is 
reduced in darker locations.
 
When burst setting is used, flash is set to [FORCED FLASH OFF], and [AUTO 
BRACKET], [MULTI ASPECT], and [AUDIO REC.] settings are cancelled.
 
When burst is performed with the built-in memory, writing will take some time.
 
Settings will be stored even if power is turned off.
 
Auto Review performed regardless of [AUTO REVIEW] setting.
 
Burst is not available in the Scene Modes [TRANSFORM], [PANORAMA ASSIST], [HI-
SPEED BURST], [FLASH BURST], [STARRY SKY], [PIN HOLE], [FILM GRAIN], [HIGH 
DYNAMIC],and [PHOTO FRAME].
 
Using the [HI-SPEED BURST] Scene Mode allows a faster succession of still pictures 
to be taken. [FLASH BURST] is convenient to take continuous still pictures using flash 
in dark places.
   [I.RESOLUTION]
Super resolution technology can be used to record still pictures with sharper outlines and 
clearer resolution. Also, when [i.ZOOM] is set, the zoom ratio can be increased to about 
1.3 with almost no deterioration of picture quality.
 
Recording Mode: 
 
 
 
 
Settings: [OFF]/[ON]/[i.ZOOM]
 
About i.ZOOM (→41)
 
The setting is fixed to [i.ZOOM] in 
 ([INTELLIGENT AUTO] Mode) and 
 
([CLIPBOARD] Mode).
 
The setting is fixed to [ON] in [HIGH SENS.] and [HI-SPEED BURST] Scene Modes, 
[OFF] in [FLASH BURST] and [PIN HOLE] Scene Modes, and [i.ZOOM] in other Scene 
Modes.