Nikon D7000 (Body Only) Manual De Usuario

281

n

• DK-20C Eyepiece Correction Lenses: Lenses are available with diopters of –5, –4, –3, –2, 

0, +0.5, +1, +2, and +3 m

–1

 when the camera diopter adjustment control is in the 

neutral position (–1 m

–1

). Use eyepiece correction lenses only if the desired 

focus can not be achieved with the built in diopter adjustment control (–3 to 
+1 m

–1

). Test eyepiece correction lenses before purchase to ensure that the 

desired focus can be achieved. The rubber eyecup can not be used with 
eyepiece correction lenses.

• Magnifying Eyepiece DK-21M: The DK-21M magnifies the view through the 

viewfinder by approximately 1.17 × (50 mm f/1.4 lens at infinity; –1.0 m

–1

) for 

greater precision when framing.

• Magnifier DG-2: The DG-2 magnifies the scene displayed in the center of the 

viewfinder for greater precision during focusing. Eyepiece adapter required 
(available separately).

• Eyepiece Adapter DK-22: The DK-22 is used when attaching the DG-2 magnifier.
• Right-Angle Viewing Attachment DR-6: The DR-6 attaches at a right angle to the 

viewfinder eyepiece, allowing the image in the viewfinder to be viewed at right 
angles to the lens (for example, from directly above when the camera is 
horizontal).

• Capture NX 2: A complete photo editing package offering such features as white 

balance adjustment and color control points.

• Camera Control Pro 2: Control the camera remotely from a computer to record 

movies and photographs and save photographs directly to the computer hard 
disk.

: Use the latest versions of Nikon software. Most Nikon software offers an auto 

update feature when the computer is connected to the Internet. See the websites 
listed on page xvii for the latest information on supported operating systems.

: The body cap keeps the mirror, viewfinder screen, and low-

pass filter free of dust when a lens is not in place.

: Use as a remote shutter release for self-portraits or to 

prevent blur caused by camera shake. The ML-L3 uses a 3 V CR2025 battery.

Pressing the battery-chamber latch to the right (q), insert a fingernail into the gap 
and open the battery chamber (w). Ensure that the battery is inserted in the 
correct orientation (r).

The D7000 is equipped with an accessory terminal for 
MC-DC2 remote cords

 (

0 73) and GP-1 GPS units (0 162), which 

connect with the 

4 mark on the connector aligned with 

the 

2 next to the accessory terminal (close the camera 

connector cover when the terminal is not in use).