Nikon Coolpix L110 Manual De Usuario

Using the Flash

Bas
ic Ph

otography an

d Pl
ayba

ck

: G
 Easy Aut

o

 M

o

d

e

Press m (flash mode) on the multi selector.

• The flash menu is displayed.

Press the multi selector H or I to select a 
mode, and press k.

• The icon for the selected flash mode is displayed at the 

top of the monitor.

• When U (auto) is applied, D disappears after a 

few seconds regardless of the monitor settings 
(

• If a setting is not applied by pressing k within a few 

seconds, the selection is cancelled.

Flash mode

14

14

B

Push the built-in flash down gently to lower the built-in flash when not in use (

A 6).

B

Shooting When Lighting Is Poor and the Flash Is Disabled (W)

• Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of 

camera shake. Set 

Vibration reduction (A 104) to Off when using a tripod.

• The E is displayed when the camera automatically increases sensitivity to minimize blur caused 

by slow shutter speed. Images taken when E is displayed may be slightly mottled.

B

When using the flash, reflections from dust particles in the air may appear as bright spots in images. 
To reduce these reflections, set the flash to W (off).

C

The flash lamp indicates flash status when the shutter-release 
button is pressed halfway.

• On:

Flash will fire when picture is taken.

• Blinks: Flash charging. Wait a few seconds and try again.
• Off:

Flash  will  not  fire  when picture is taken.

If the remaining battery level is low, the monitor will turn off 
until the flash has finished charging.