Nikon D300S (Body Only) Manual De Usuario

163

J

Custom Picture Controls created using the Picture Control Utility 
available with ViewNX or optional software such as Capture NX 2 
can be copied to a memory card and loaded into the camera, or 
custom Picture Controls created with the camera can be copied to 
the memory card to be used in compatible cameras and software 
and then deleted when no longer needed (if two memory cards 
are inserted, the card in the primary slot will be used; 

0 72). 

To copy custom Picture Controls to or from 
the memory card, or to delete custom Picture 
Controls from the memory card, highlight 
Load/Save in the Manage Picture Control 
menu and press

2. The following options will 

be displayed:
• Copy to camera: Copy custom Picture Controls from the memory 

card to custom Picture Controls C-1 through C-9 on the camera 
and name them as desired.

• Delete from card: Delete selected 

custom Picture Controls from the 
memory card. The confirmation 
dialog shown at right will be 
displayed before a Picture Control 
is deleted; to delete the selected 
Picture Control, highlight 

Yes and 

press 

J.

• Copy to card: Copy a custom Picture Control (C-1 through C-9) from 

the camera to a selected destination (1 through 99) on the 
memory card.

A

Up to 99 custom Picture Controls can be stored on the memory card at 
any one time. The memory card can only be used to store user-created 
custom Picture Controls. The preset Picture Controls supplied with the 
camera can not be copied to the memory card, renamed, or deleted.