Nikon D5200 18105mm Kit Guía Del Usuario

59

In manual mode, you control both shutter speed and aperture. To take photographs 
in manual mode:

Checking the exposure indicator (see below), adjust shutter speed and 
aperture. Shutter speed is selected by rotating the command dial: choose from 
values between 30 s and 

1

/

4000

s or select “Bulb” or “Time” to hold the shutter 

open indefinitely for a long time-exposure (

0 60). Aperture is selected by 

rotating the command dial while keeping the 

E (N) button pressed: choose 

from values between the minimum and maximum for the lens. Shutter speed 
and aperture are shown in the viewfinder and information display.

E (N) button

A

If a CPU lens is attached (

0 199) and a shutter speed other than “Bulb” or “Time” is selected, 

the exposure indicator in the viewfinder and information display shows whether the 
photograph would be under- or over-exposed at current settings (the display varies 
depending on the options selected for Custom Settings b1, EV steps for exposure cntrl and 
f5, Reverse indicators; 

0 159, 166). If the limits of the exposure metering or live view 

exposure control system are exceeded, the indicator will flash.