Nikon 25438 Manual De Usuario

Descargar
Página de 204
159
Maximizing 
the Life of the 
Ca
m
era
Maximizing the Life of the 
Camera
Caring for the Camera
Storage
When the camera will not be used for an extended period, turn the camera off, remove 
the battery, and store the battery in a cool, dry area with the terminal cover in place. To 
prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store the 
camera with naphtha or camphor moth balls or in locations that:
• are poorly ventilated or subject to humidities of over 60%
• are next to equipment that produces strong electromagnetic fields, such as televisions 
or radios
• are exposed to temperatures above 50°C/122°F (for example, near a space heater or in a 
closed vehicle in a hot day) or below –10°C (14°F)
Cleaning
B
The Monitor
Should the monitor break, care should be taken to avoid injury caused by broken glass and to 
prevent liquid crystal from the monitor from entering your eyes or mouth.
B
Servicing the Camera and Accessories
The D60 is a precision device and requires regular servicing. Nikon recommends that the camera be 
inspected by the original retailer or Nikon service representative once every one to two years, and 
that it be serviced once every three to five years (note that fees apply to these services). Frequent 
inspection and servicing are particularly recommended if the camera is used professionally. Any 
accessories regularly used with the camera, such as lenses or optional Speedlights, should be 
included when the camera is inspected or serviced.
Camera body
Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the 
camera at the beach or seaside, wipe off sand or salt with a cloth lightly dampened in 
distilled water and dry thoroughly. ImportantDust or other foreign matter inside the camera 
may cause damage not covered under warranty.
Lens, mirror, and viewfinder
These elements are made of glass and are easily damaged. Remove dust and lint with a 
blower. If using an aerosol blower, keep the can vertical to prevent the discharge of liquid. 
To remove fingerprints and other stains, apply a small amount of lens cleaner to a soft cloth 
and clean with care.
Monitor
Remove dust and lint with a blower. When removing fingerprints and other stains, wipe the 
surface lightly with a soft cloth or chamois leather. Do not apply pressure, as this could result 
in damage or malfunction.