Planet Technology ICA-350 Manual De Usuario

                                                                                                 

Use this menu to configure the network to connect the device and the clients. 

 

This section provides the menu of connecting the device through Ethernet cable. 

 

MAC Address 

Display the Ethernet MAC address of the device. Note that user cannot 
change it. 

Obtain an IP 
address 
automatically 
(DHCP) 

DHCP: Stands for Dynamic Host Configuration Protocol. Enable this 
checked box when a DHCP server is installed on the network to issue IP 
address assignment. With this setting, the IP address is assigned 
automatically. If this device cannot get an IP address within limited tries, the 
device will assign a default IP address, 192.168.0.20, by itself as the default 
IP address. 

IP address, 
Subnet mask, 
Gateway, 1st DNS, 
2nd DNS server 

If you do not select Obtain an IP address automatically, then you need to 
enter these network parameters by yourself. 

IP Address 

This address is a unique numbers that identifies a computer or device on 
the WAN or LAN. These numbers are usually shown in groups separated by 
periods, for example: 192.168.0.200 

Subnets allow network traffic between hosts to be separated based on the 
network's configuration. In IP networking, traffic takes the form of packets. 
IP subnets advance network security and performance to some level by 
organizing hosts into logical groups. Subnet masks contain four bytes and 
usually appear in the same "dotted decimal" data. For example, a very 
common subnet mask in its binary demonstration 11111111 11111111 

 35