Canon MD140 Manual De Usuario
Connecting to a TV or VCR
64
When recording to a digital video recorder
using the DV terminal –connection type
(
(
61)–:
- If the picture does not appear, disconnect the
DV cable and restore the connection after a
short while or turn the camcorder off and then
on again.
- Proper operation cannot be guaranteed for all
digital devices equipped with a DV terminal. If
the operation does not work, use the AV
terminal.
DV cable and restore the connection after a
short while or turn the camcorder off and then
on again.
- Proper operation cannot be guaranteed for all
digital devices equipped with a DV terminal. If
the operation does not work, use the AV
terminal.
Digital Video Dubbing
You can input video from other digital
video devices and record the input video
on the tape in the camcorder.
video devices and record the input video
on the tape in the camcorder.
Connecting
Connect the camcorder to the video input
source using the digital connection
–connection type (
source using the digital connection
–connection type (
61)– shown in
the previous section Connection
Diagrams.
Diagrams.
Dubbing
1
Load a blank cassette in this
camcorder.
camcorder.
2
Connected device: Load the
recorded cassette or disc.
recorded cassette or disc.
3
Press
, select (
)
[
REC PAUSE] and press (
).
4
Select (
) [EXECUTE] and press
(
).
5
Connected device: Start the
playback.
playback.
In record pause mode and while
recording you can check the picture on
the camcorder’s screen.
recording you can check the picture on
the camcorder’s screen.
6
When the scene you wish to record
appears, push the joystick ( )
towards
appears, push the joystick ( )
towards
/ to begin recording.
Recording starts.
7
While recording, push the joystick
( ) towards
( ) towards
/ to pause the
recording.
In record pause, push the joystick ( )
towards
towards
/
again to resume
recording.
8
Push the joystick (
) towards
to
stop recording.
9
Connected device: Stop the
playback.
playback.
IMPORTANT
Blank sections may be recorded as
anomalous picture.
If the picture does not appear, disconnect the
DV cable and restore the connection after a
short while or turn the camcorder off and then
on again.
short while or turn the camcorder off and then
on again.
Do not connect any devices to the
camcorder’s USB terminal while an external
device is connected to the DV terminal.
device is connected to the DV terminal.
You can only record video signals in DV
standard (standard definition, SP or LP mode)
from devices carrying the
from devices carrying the
logo. Note that
signals from identically shaped DV (IEEE1394)
terminals may be in different video standards.
terminals may be in different video standards.
NOTES
We recommend powering the camcorder using
the compact power adapter.
the compact power adapter.
Concerning Copyright
Copyright Precaution
Certain pre-recorded video tapes, films and
other materials, as well as some television
programs are copyrighted. Unauthorized
Certain pre-recorded video tapes, films and
other materials, as well as some television
programs are copyrighted. Unauthorized
(
FUNC.
2
2
FUNC.