Canon PowerShot A530 Manual De Usuario

Descargar
Página de 139
113
A
ppe
nd
ix
„Batteries
Charge becomes Severely Limited
If the battery usage time has considerably diminished, wipe the battery 
terminals well with a dry cloth. The terminals may be dirty from fingerprints.
Usage in Cold Temperatures (Less than 0°C/32°F)
Get a spare generic lithium battery (CR123A or DL123). You are 
recommended to place the spare battery in your pocket to warm it 
up before switching it for the battery in the flash.
Non-Use over Extended Periods
Leaving batteries in the High-Power Flash could allow the battery 
fluid to leak, damaging the product. Remove the batteries from the 
High-Power Flash and store them in a cool, dry place.
z When shooting in 
 mode, or when [Flash Adjust] in the 
 or 
 modes is set to [Manual] (p. 65), the High-
Power Flash will not fire.
z The flash charge time will lengthen as the battery charge 
gets weaker. Always set the power/mode switch to [OFF] 
when you finish using the flash.
z Be careful not to touch the flash window or sensor 
windows with your fingers while the flash is in use.
z The flash may fire if another flash is being used in close 
proximity.
z The High-Power Flash may not fire outdoors in daylight or 
when there are no reflective items.
z For continuous shooting, although the flash fires for the 
first shot, it does not fire for subsequent shots.
z Fasten the attachment screws securely so that they do not 
loosen. Failure to do so may lead to the dropping of the 
camera and flash resulting in damage to both.
z Before attaching the bracket to the flash, check that the 
lithium battery (CR123A or DL123) is installed.
z To illuminate the subjects properly, install the flash so that it 
is up against the side of the camera and parallel with the 
camera’s front panel.
z A tripod can be used even when the flash is attached.