Casio EX-Z3000 Manual De Usuario
108
Other Settings (Set Up)
Procedure
MENU * Setup * Calibrate TP
Calibrate the touch panel whenever a touch operation does not produce the desired
results or if touch panel response is poor.
results or if touch panel response is poor.
1.
Touch “Start”.
2.
Touch the centers of each of the four cross
marks “+” as they appear on the screen.
Take your time when performing this
operation and wait until the next cross
appears.
marks “+” as they appear on the screen.
Take your time when performing this
operation and wait until the next cross
appears.
The message “Complete” indicates that touch
panel calibration is complete.
panel calibration is complete.
• Carefully touch the center of each cross mark (+).
Procedure
MENU * Setup * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
output system. You can also specify an aspect ratio of 4:3 or 16:9.
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
Calibrating the Touch Panel (Calibrate TP)
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
NTSC
Video system used in Japan, the U.S., and other countries
PAL
Video system used in Europe and other areas
4:3
Normal TV screen aspect ratio
16:9
Wide screen aspect ratio