Casio EX-Z450 Manual De Usuario

39

Snapshot Tutorial

• If there is not enough available capacity on the memory card, you may not be able 

to record the number of CS images indicated on the monitor screen. Make sure 
your memory card has sufficient remaining capacity before shooting with using 
continuous shutter.

• With continuous shutter, exposure and focus for the first image are applied for 

successive images as well.

• When using a continuous shutter mode, keep the camera still until shooting is 

finished.

• Continuous shutter cannot be used in combination with any of the following.

– Some BEST SHOT scenes (AUTO BEST SHOT, Dynamic Photo, Multi-motion 

Image, ID Photo, Business cards and documents, White board, etc., Prerecord 
(Movie), For YouTube, Voice Recording)

– Make-up Mode, Landscape Mode

• The speed of “CS: Normal Speed CS” depends on the type of memory card loaded 

in the camera and the amount of free space available for storage. When shooting 
to built-in memory, continuous shutter shooting is relatively slow.

• “CS: Normal Speed CS” speed is slower when shooting with flash.
• You cannot use the self-timer in combination with “CS: Normal Speed CS”, 

“CS: 4 fps”, “CS: 10 fps”.

• Note that images recorded with “CS: 4 fps”, “CS: 10 fps” and “CS: Flash” are of 

somewhat lower resolution and more prone to digital noise than images recorded 
with “CS: Normal Speed CS”.

• The ISO sensitivity setting always is “AUTO” for “CS: 4 fps”, “CS: 10 fps” and 

“CS: Flash”, regardless of the camera’s current ISO sensitivity setting.

• The flash range for Flash CS is narrower than that for normal flash.
• Shooting a very bright subject can cause a vertical band or a pink cast on the 

monitor screen image. This does not indicate malfunction.

When shooting people, the face detection feature detects the faces of up to ten 
individuals and adjusts focus and brightness accordingly.

Use [8] and [2] to select the seventh Control Panel option from the 
top (Face Detection).