Casio K823PCM1DMX Manual De Usuario

• You may not be able to achieve the brightness you want

when recording an image that is very dark or very bright.
If this happens, use the M mode (manual exposure) to
adjust the aperture or shutter speed manually.

• You can select the “BULB” setting in the S mode (shutter

speed priority AE) or M mode (manual exposure).

• With the “BULB” setting, exposure continues as long as

you keep the shutter button depressed, for up to 60
seconds.

• Note that when you are using the “BULB” setting, the

record operation with the card remote controller is
different from the record operation on the camera.

• Using slow shutter speeds can cause digital noise to

appear in the image. Because of this, the camera
automatically performs a noise reduction process
whenever the shutter speed is one second or slower. The
slower the shutter speed, the greater the possibility that
noise will be generated in an image. If you notice digital
noise in your images at very slow shutter speeds, try
using a shutter speed setting that is faster than four
seconds. Also note that the noise reduction process can
cause it to take longer (about double the shutter speed
setting or more) to record each image.

• At shutter speeds slower than 1/8 second, the brightness

of recorded image may not be the same as the brightness
of the image that appears on the monitor screen.

The AE Lock feature lets you lock auto exposure at a
particular setting. This feature is separate from the AE lock
effect you can achieve by pressing the shutter button half way
in any exposure mode besides the M mode (manual exposure).
You can use AE Lock in the following instances.

— To set up exposure on a subject that is different from

the subject selected by Auto Focus

— To setup exposure prior to using the flash for recording