Casio EX-ZR200 Manual De Usuario

77

Using BEST SHOT

This function analyzes a burst of consecutive images and then blurs the background 
behind the main subject. This creates an effect that really makes the subject stand 
out, just like photographs taken with a single-lens reflex camera.

In the REC mode, set the mode dial to b (BEST SHOT).

• Get as close as possible to the subject. Also, the background should be as far 

away as possible from the subject. The required distances depend on the 
zoom factor being used.

• This will cause the message “Busy... Please wait...” to appear. Do not move 

the camera while this message is displayed. The recording process takes 
some time to complete after the message appears.

• The current “Zoom (SR)” (page 52) setting is ignored when shooting with this 

function.

• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash 

Off).

• The desired background blur effect may not be attained if the camera or subject 

moves during shooting.

• Depending on the shooting environment, image composition, and subject, this 

BEST SHOT scene may not be able to produce the desired result.

• If the camera determines that it is unable to blur the background of an image for 

some reason, it will display the message “Blur processing failed.”. Note, however, 
that the image will be saved, even if background blurring is not possible.

Shot with “Auto”.

Shot with “Blurred Background”.

Example : When zoom is set to full wide (W), the distance between the camera 

and subject should be 30cm, while the distance between the subject 
and background should be at least 1 meter.