Casio EX-Z1 Manual De Usuario
115
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * REC/PLAY
• With “Power On/Off”, the camera turns off when you press [
r
] (REC) in the REC
mode or [
p
] (PLAY) in the PLAY mode.
• Change this setting to anything besides “Disable” before connecting to a TV for
image viewing.
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
used when exchanging data with a computer, printer, or other external device.
Configuring [r] and [p] Settings (REC/PLAY)
Power On
Camera turns on whenever [
r
] (REC) or [
p
] (PLAY) is
pressed.
Power On/Off
Camera turns on or off whenever [
r
] (REC) or [
p
] (PLAY)
is pressed.
Disable
Camera does not turn on or off whenever [
r
] (REC) or [
p
]
(PLAY) is pressed.
Configuring USB Protocol Settings (USB)
Mass
Storage
Storage
Select this setting when connecting to a computer (pages 89, 98).
With this setting, the computer sees the camera as an external
storage device. Use this setting for normal transfer of images from
the camera to a computer.
With this setting, the computer sees the camera as an external
storage device. Use this setting for normal transfer of images from
the camera to a computer.
PTP
(PictBridge)
(PictBridge)
Select this setting when connecting to a printer that supports
PictBridge (page 82). This setting simplifies the transfer of image
data to the connected device.
PictBridge (page 82). This setting simplifies the transfer of image
data to the connected device.