Casio EX-S880 Manual De Usuario

Descargar
Página de 293
111
USING BEST SHOT
IMPORTANT!
• Anti Shake will not work unless the ISO sensitivity setting 
(page 135) is set to “Auto”.
• Though “
” (Anti Shake) is displayed on the monitor 
screen following an automatic flash operation using the 
“Auto Flash” or “Red Eye Reduction” setting, or while the 
flash setting is “Flash On” or “Soft Flash”, Anti Shake is 
disabled.
• Shooting with Anti Shake can cause an image to appear 
somewhat coarser than normal and can cause slight 
deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of hand 
or subject movement when movement is severe.
• You can also use Anti Shake to reduce the effects of hand 
movement only while recording a movie. The effects of 
subject movement are not limited (page 96).
• Anti Shake may not work with a very low shutter speed. If 
this happens, use a tripod to stabilize the camera.
• The camera sometimes performs an automatic noise 
reduction operation to reduce digital noise in images 
recorded under certain lighting conditions. This operation 
causes the camera to take longer than normal to store the 
image and be ready for the next shot.
The BEST SHOT “High Sensitivity” scene makes it possible for 
you to take natural looking images without using the flash, even 
when lighting is low
1.
In the REC mode, press [BS].
2.
Use [
S], [T], [W], and [X] to select the “High 
Sensitivity” scene and then press [SET].
3.
Press the shutter button to shoot the image.
High Sensitivity will remain selected until you select a 
different BEST SHOT scene.
Taking Bright Images without Flash
Normal Snapshot (With flash)
Snapshot with High Sensitivity
B