Casio EX-H20G Manual De Usuario

108

Using the Hybrid-GPS

[MENU] * Set Up Tab * Auto Rotate

The camera automatically detects whether a snapshot image was shot in portrait or 
landscape orientation and displays it accordingly.

• The current “Auto Rotate” setting is ignored while “Off” is selected for the “GPS” 

setting (page 92).

[MENU] * Set Up Tab * Time Auto Correct

While “On” is selected for the “Time Auto Correct” setting, the camera uses time data 
received from GPS satellites to automatically correct its clock settings.

• Note that switching between summer time and standard time is not performed 

automatically.

• World Time settings (for all 32 time zones) are corrected when a wave is received 

from the GPS satellites. Note, however, that in this case the displayed time will not 
change until you turn the camera off and then back on again. If you travel to 
another time zone, you can find out the current local time by turning the camera off 
and then back on again, and checking the displayed time.

• Attempting to change “World Time” setting (page 144) or the “Adjust” setting (page 

146) while “On” is selected for the “Time Auto Correct” setting, will cause the 
message “Auto time correction is turned on. Cannot perform operation.” to appear 
on the display.

• The World Time City and time settings may not update correctly when you are 

located in the vicinity of a boundary between two time zones. If this happens, select 
“Off” for the “Time Auto Correct” setting, and then use “World Time” setting (page 
144) or the “Adjust” setting (page 146) to adjust the time and date settings.

• The current “Time Auto Correct” setting is ignored while “Off” is selected for the 

“GPS” setting (page 92).

For information about menu operations, see page 58.
For information about other settings, see page 140.

Automatically rotates snapshots shot with the camera held vertically 90 
degrees.

Images not rotated automatically.