Clover Electronics HDC501 Manual De Usuario
Note:
▪ Apply the provided AC adapter only.
▪ The total length of cable must not exceed 200’ including extension
cable.
▪ Apply the provided AC adapter only.
▪ The total length of cable must not exceed 200’ including extension
cable.
TROUBLE SHOOTING
If the camera does not function properly, check the following points before contacting the
service center.
Troubles Remedies
No video
Check the AC adapter and video cable
between the camera and a monitor
between the camera and a monitor
The image on the screen is dark
Check the brightness control on the
monitor
monitor
The image on the screen is dim
Check if the lens is stained. If dirty,
clean it with soft and clean cloth
clean it with soft and clean cloth
The camera is not working properly, and
the surface of the camera case is hot
the surface of the camera case is hot
Check if you have connected the
provided AC adapter
provided AC adapter
The contrast on the screen is too weak
Adjust the contrast feature of the
monitor. If the camera is exposed under
too strong light, change the position
monitor. If the camera is exposed under
too strong light, change the position
The image on the screen flickers
Does the camera face to directly to the
sunlight or fluorescent light? Change the
camera position
sunlight or fluorescent light? Change the
camera position
Picture rolls and jumps, scrambled
picture
picture
Improper V-hold control. Setting on your
monitor
monitor
Picture smaller than screen
House current may be too low
SPECIFICATIONS
• Image sensor
1/3” Sony Super HAD CCD, 811H x 508V
• Effective
pixels
768H
x
494V
• Scanning
system 525
lines, 2:1 interlace
• Horizontal resolution
560 TV lines
• Shutter speed
Auto, Manual (1/60 to 1/120,000 sec)
• Sync.
System
Internal
• S/N ratio
more than 50db (AGC off)