Concord Camera 3040AF Manual De Usuario

10

TAKING A PICTURE

Taking a picture with the viewfinder:
1. Turn the camera on.
2. Set the camera to (      ) Camera Mode and make sure the Macro Mode Switch is set to the (      ) Distant

Mode located on the front of the camera. 
• The LCD can be switched off to conserve battery power by pressing the (       ) button.

3. Frame the subject in the viewfinder.
4. Press the shutter button half-way to activate the auto-focus until the green AF LED lights up. (For

information on Focus Lock, please go to page 11) (fig.1.1)
• The camera will focus the lens at different distances to find the correct focus range, and you will hear a

rapid click sound from the camera.

5. Press the shutter button fully to capture the image. (fig.1.2)

• The camera will beep when the image is captured if sound is activated.
• The camera will make a click sound.
• When the image has been captured, the Flash Ready LED next to the viewfinder will blink to indicate that

the image is being stored.

Note: It is recommended that pictures in Distant Mode be taken at at least 1 meter(3 ft) away from the
subject.

Steady (fig.1.3)

The camera is capturing a picture or video clip.
Hold the camera steady to prevent blurry pictures.

Blinking (fig.1.4)

The flash is recharging. You may move the
camera in this mode. 

Note: Do not power the camera off or switch modes while the camera is capturing or storing a picture or
video clip to prevent corrupting the picture or video clip being stored.

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

AF

 

⁄   ⁄ 

4

M

28/45

 

⁄   ⁄ 

fig.1.1

 

⁄   ⁄ 

 

⁄   ⁄ 

AF

 

⁄   ⁄ 

4

M

28/45

 

⁄   ⁄ 

 

⁄   ⁄ 

fig.1.2

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

AF

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

AF

 

⁄   ⁄ 

fig.1.3

fig.1.4

3040 UG(513438-01).qxd  2003:11:15  10:11 AM  Page 10